Vonyx ST014 Handleiding

Vonyx Speaker ST014

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx ST014 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 112 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

ST014 Personal PA Wireless System

UHF

Ref. nr.: 178.866

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his unit is with speaker inside which can cause If t

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- his unit is with built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35°C/95°F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

Description of the amplier:

1.Volume Control

2.Tone Control

3.Audio Inp ut

4.USB socket

5.Wired mic input

6.Power On/O

A. Operation of the Amplier:

Firstly, make sure the amplier is available in the current power voltage.

1. Using AC power supply:

Connecting with AC power, please switch to POWER ON position,

and the power indicator turns green ,it shows the amplier works

normally(If suddenly AC power is cut o, t built in rechargeable will supply power automatically); he –

2. Using DC power supply:

Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low power warning set, if

it’s low battery, it will provides a “BEEP” sound to inform the users to charge the amplier.

Caution: Please switch to POWER OFF position when you nish using the amplier, otherwise, it will inuence battery life “ ”

span.

B. Operation of wireless transmitter:

1. Open the cover, install the battery with correct polarity then close the cove.

2. Switch to ON position, the indicator ash up then black out ,it means can work normally ,please turn o the power after

using it.

3. The best way to set the voice volume of amplier to half position and then you can adjust the volume to meet your needs.

Caution:

1. If the transmitter is ON, but the LED indictor is dim or o, it means the battery is low or you have placed the

battery wrong polarity.

2. Please take out the battery if you do not want to use it for a long period.

Operation BT-Technology:

Press button to switch on the -function. Then use your mobile phone or computer to search a BT-device and “MODE” BT

connect the ST014 with your device.

TROUBLESHOOTING:

The problems might be

Reasons and Resolutions

The power indicator is dim

It indicates the battery low, please change to AC supply and

charge it immediately;

Hash Howl

1. Turn down the volume of amplier

2. Turn the tone control to Bass

3. Adjust the distant between amplier and microphone ,do not

face the speaker of amplier while using it

Noise

1. Battery low of the amplier or transmitter;

2. The microphone cord might be damaged;

3. Interference by same frequency (863.100MHz).

UHF

No license required (excluding geographical restrictions)

Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO),

Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB)

Product specificaties

Merk:	Vonyx
Categorie:	Speaker
Model:	ST014
Accu/Batterij voltage:	12 V
Ingangsspanning:	220 - 240 V
Microfoontype:	Draagbare microfoon
Frequentie:	50 Hz
Totale harmonische vervorming (THD):	0.1 procent
Receiver afmetingen (B x D x H):	285 x 160 x 175 mm
Ontvanger type:	Bodypack-ontvanger
Type energiebron van microfoon:	Batterij/Accu
AF-frequentiebereik van ontvangers:	60 - 15000 Hz
Uitgang van 6,35 mm (1/4-inch):	1
3,5 mm in:	Ja
Aantal ontvangers inbegrepen:	1
Aantal microfoons inclusief:	1