Vonroc PM505AC Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Vonroc PM505AC (52 pagina's) in de categorie Overig. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/52
POLISHER
PM505AC
EN Original Instructions 03
DE Übersetzung Der Originalbetriebsanleitung 08
NL Vertaling van de oorspronkelijke gebruiksaanwijzing 15
FR Traduction de la notice originale 21
ES Traducción del manual original 28
IT Traduzione delle istruzioni originali 34
PL Tłumaczenie instrukcji oryginalnej 41
WWW.VONROC.COM2
A
B
1
3
4
2 2
5
EN
3
WWW.VONROC.COM
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance
of the instructions in this manual.
Risk of electric shock.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection.
Class II machine - Double insulation -
You don’t need any earthed plug.
The product is in accordance with the
applicable safety standards in the European
directives.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with
your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
Product specificaties
| Merk: | Vonroc |
| Categorie: | Overig |
| Model: | PM505AC |
Heb je hulp nodig?
Als je hulp nodig hebt met Vonroc PM505AC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Overig Vonroc
30 December 2022
30 December 2022
30 December 2022
30 December 2022
30 December 2022
Handleiding Overig
- Overig Bosch
- Overig Panasonic
- Overig AEG
- Overig DeWalt
- Overig Karcher
- Overig WOLF-Garten
- Overig Airpress
- Overig Al-ko
- Overig Alpina
- Overig Altrex
- Overig Ateq
- Overig Atika
- Overig Bartec
- Overig Batavia
- Overig Black Decker
- Overig Blucave
- Overig Bort
- Overig Bostitch
- Overig Brennenstuhl
- Overig Bruder Mannesmann
- Overig DAP
- Overig Datona
- Overig Defort
- Overig Digi
- Overig Dollken-Weimar
- Overig Dolmar
- Overig Dremel
- Overig Dunlop
- Overig Duro
- Overig Easymaxx
- Overig Einhell
- Overig Emco
- Overig Ergofix
- Overig Fein
- Overig Ferm
- Overig Ferrex
- Overig Festool
- Overig Flex
- Overig Flowserve
- Overig Fuxtec
- Overig Gamma
- Overig Gloria
- Overig Grizzly
- Overig Gude
- Overig Gude Pro
- Overig Heidenhain
- Overig Hikoki
- Overig Hitachi
- Overig Hofmann
- Overig Holzmann
- Overig Husqvarna
- Overig Huvema
- Overig Hyundai
- Overig Ideen Welt
- Overig Komatsu
- Overig Kompernass
- Overig Kraft
- Overig Laserliner
- Overig Logilink
- Overig Lotus
- Overig Makita
- Overig Max
- Overig Maxicool
- Overig Milwaukee
- Overig NDS
- Overig Numatic
- Overig Parkside
- Overig PLS - Fluke
- Overig Powerfix
- Overig Powerfix Profi
- Overig Powerplus
- Overig Rawlink
- Overig Renovator
- Overig Rupes
- Overig Ryobi
- Overig Scheppach
- Overig Sievert
- Overig Skil
- Overig Sparky
- Overig Spero
- Overig Stanley
- Overig Stihl
- Overig Stomer
- Overig Tecomec
- Overig Topcraft
- Overig Triton
- Overig Tronic
- Overig Turbotech
- Overig Turbotronic
- Overig Varo
- Overig Voltcraft
- Overig Wagner
- Overig Workzone
- Overig Xenteq
- Overig Zodiac
- Overig OKAY
- Overig Omega
- Overig Oregon
- Overig Proxxon
- Overig Probuilder
- Overig Kyoritsu
- Overig Sola
- Overig Mac Allister
- Overig Max Bahr
- Overig Maxxtools
Nieuwste handleidingen voor Overig
8 Januari 2024
10 December 2023
10 December 2023
17 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023