Vollrath Cheese Blocker 1837 Handleiding

Vollrath Snijmachine Cheese Blocker 1837

Lees hieronder de 📖 handleiding in het Nederlandse voor Vollrath Cheese Blocker 1837 (4 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 7 personen en werd door 4 gebruikers gemiddeld met 4.3 sterren beoordeeld

Download PDF

Pagina 1/4

ENGLISH

Item No. 2350029-1 Rev 5/10

ENGLISH

Operator’s Manual

Cheese Blocker

1837

Thank you for purchasing this Vollrath Counter Top Cooking Equipment. Before operating the unit, read and familiarize yourself with the

following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and

packaging. Use this packaging to ship the unit if repairs are needed.

M F P eanual ood rocessing quiPMent

OperatOr s anual’ M

BASE ASSEMBLY. Supports the food product.

FRONT PLATE. Supports the front edge of the food product.

CUTTING WIRE. Cuts through the food product.

EYE BOLT. Holds the front of the cutting wire.

“L” BOLT. Holds the back of the cutting wire.

WING NUT. Secures the bolts and cutting wire.

THUMB SCREWS. Secures the front plate to the base

assembly.

Unpacking the qUipment and nitial etUp e i S

Carefully remove packaging materials from the unit. When no longer needed,

dispose of all packaging, materials in an environmentally responsible manner.

OperatiOn

WARNING

Sharp Blade/Wire Hazard.

Blade/Wires are sharp and can cause cuts. To avoid

injury from sharp blades/wires, handle with caution.

Prior to rst use, it is important to clean the unit. Wash new unit with warm

soapy water and rinse thoroughly to remove the thin protective oil lm.

1. Place the unit on a clean, at work surface.

2. Before each use, check that the unit is clean and the cutting wire (E) is in

good condition. If loose or broken, the cutting wire must be replaced. See

Figure 1.

3. Prepare the food product to be processed.

4. Lift the cutting bow assembly (A) and place the food product on base

assembly (C) and against the front plate (D).

5. Using a slow, consistent movement draw the cutting wire (E) through the

food product.

6. Repeat this process until you have prepared enough food product for

your daily needs.

7. Clean and lubricate your machine immediately after each use. See the

CLEANING section of this manual for more information.

cleaning

WARNING

Sharp Blade/Wire Hazard.

Blades are sharp and can cause cuts. To avoid

injury from sharp blades, handle with caution.

To maintain the appearance and increase the service life, clean your daily.

NOTE:

Food acids will make blades dull and corrode the metal.

Always clean this food preparation machine immediately

after every use.

1. Remove the thumb screws (I) and front plate (D) from the base

assembly (C).

S pafety recaUtiOnS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that cause can severe

personal injury, death, or substantial property damage if the warning is

ignored.

CAUTION

Caution is used to indicate the presence of a hazard that or cause will can

minor personal injury or property damage if the caution is ignored.

NOTE

Note is used to notify people of installation, operation, or maintenance

information that is important but not hazard-related.

For Your Safety!

These precautions should be followed at all times. Failure to follow

these precautions could result in injury to yourself and others.

To reduce risk of injury or damage to the unit:

Check unit before each use to insure the equipment is clean.

Check for broken, blade/wire and if found, replace the blade/wire

assembly.

f pUnctiOn and UrpOSe

Intended for cutting cheese and other soft food products.

featUreS and OntrOlS c

Figure 1. Features and Controls of the Cheese Blocker.

CUTTING BOW ASSEMBLY. Rotates on the pivot pin and holds

the cutting wire.

HANDLE END CAP. Covers the end of the cutting bow.

M F P eanual ood rocessing quiPMent

ENGLISH

OperatOr s anual’ M

1. Loosen the wing nuts (H) holding the eye bolt (F) and the “l” bolt (G). It is

not necessary to remove the bolts or wing nuts to replace the cutting wire

(E). See Figure 1.

2. Remove and discard the old cutting wire (E).

3. Place the loops of the new cutting wire (E) onto the eye bolt (F) and the

“l” bolt (G).

4. Tighten the wing nuts (H) and the cutting wire (E).

r p leplacement artS iSt

See Figure 1.

LETTER PART NO. DESCRIPTION

E 1838 Cutting Wire (package of 3)

F 1839 Eye Bolt (package of 4)

H 1840 Wing Nut (package of 6)

G 1841 “L” Bolt (package of 4)

Not Shown 1824 Brush

2. Wipe, rinse or spray off the base assembly (C), cutting bow assembly (A)

and front plate (D) thoroughly with HOT water.

3. Do not put this machine in a dishwasher or dish machine with soaps,

detergents, or other alkaline chemicals that can harm the machine.

4. After cleaning, let the machine air dry.

5. Install the front plate (D) and securing with the thumb screws (I).

preventative aintenance m

1. Clean machine after every use.

2. Use for intended purposes only.

3. Change blade/wire regularly - based on usage.

r c W aeplacing Utting ire SSembly

WARNING

Sharp Blade/Wire Hazard.

Blades are sharp and can cause cuts. To avoid

injury from sharp blades, handle with caution.

Wash new cutting wire with warm, soapy water and rinse thoroughly to

remove the thin protective oil lm.

W Sarranty tatement fOr he Ollrath O t v c . l.l.c.

The Vollrath Company LLC warrants the products it manufactures and distributes against defects in materials and workmanship for a period of one year, except as specically

provided below. The warranty runs 12 months from the date of original installation. (End user receipt)

1. Refrigeration compressors – The warranty period is 5 years.

2. Replacement parts – The warranty period is 90 days.

3. Fry pans and coated cookware – The warranty period is 90 days

4. EverTite™ Riveting System – The warranty covers loose rivets

only, forever.

5. Cayenne® Heat Strips – The warranty period is 1 year plus an

additional 1 year period on heating element parts only.

6. Ultra and Professional Induction Ranges – The warranty period

is 2 years.

7. Mirage and Commercial Induction ranges - The warranty period

is 1 year.

8. ServeWell® Induction Workstations – The warranty period is one

year on the workstation table and 2 years on induction hobs.

9. Slicers – The warranty period is 10 years on gears and 5 years

on belts.

10. Mixers – The warranty period is 2 years.

11. Extended warranties are available at the time of sale.

12. Boxer Mixers – 1 Year exchange Warranty.

13. Vollrath – Redco products – The warranty period is 2 years.

14. Optio / Arkadia product lines – The warranty period is 90 days.

15. All non-stick products (i.e. fry pans and surfaces) are 90 days for

the non stick surfaces.

All products in the Jacob’s Pride

collection,

including the following, have a lifetime warranty:

• NSF Certied One-Piece Dishers

• NSF Certied Spoodle

Utensils

• NSF Certied Heavy-Duty Spoons with

Ergonomic Handle

• NSF Certied Heavy-Duty Basting Spoons

• Heavy duty Turners with Ergonomic handle

• One-Piece Tongs*

• Heavy-Duty One-Piece Ladles*

• Nylon Handle Whips

• One-Piece Skimmers

• Tribute

, Intrigue

, and Classic Select

Cookware*

*Jacob’s Pride® warranty does not cover Kool-

Touch®, non stick coatings and silicone handles.

Items sold having no warranty:

• Meat Grinder Knives

• Light Bulbs in Convection Ovens and Hot

Food Merchandiser

• Oven Door Seals

• Oven Door Glass

• Hot Food Merchandisers / Display Case

Glass

• Calibration and set up of gas equipment

• Slicer / Dicer blades (table top food prep) –

Redco and Vollrath

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the

defective product or part without charge, except as otherwise provided below:

• For refrigeration compressors and the second year of the warranty on Cayenne® Heat Strips and mixers, The Vollrath Company LLC will provide the repaired

or replacement part only; and the buyer will be responsible for all labor charges incurred in performing the repair or replacement.

• To obtain warranty service, the buyer will be responsible to return to The Vollrath Company LLC any product (other than gas equipment that is permanently

installed) weighing less than 110 lbs. or located outside of a 50-mile radius of a certied technician designated by The Vollrath Company LLC to perform

warranty repairs. If a Vollrath Technician cannot be contacted check the website for service contact points. (Please refer to the Product Catalogue for weights

and sizes of product)

• No remedy will be available for products that have been damaged by accident, carelessness, improper installation, lack of proper setup or supervision

when required, neglect, improper use, installation or operation contrary to installation and operating instructions or other causes not arising out of defects in

materials or workmanship. At the buyer’s request, The Vollrath Company LLC will repair and or replace such products at a reasonable cost.

• No remedy will be available for slicers where blade has not been sharpened (Refer to owner’s manual for sharpening instructions)

• No remedy will be available for mixers damaged by changing gears while unit is running or overloading, in either case as determined by a Vollrath Certied

Technician