Vokèra Linea ONE Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Vokèra Linea ONE (12 pagina's) in de categorie CV Ketel. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
Users
Instructions
THESE INSTRUCTIONS
TO BE RETAINED
BY USER
Linea ONE
High efficiency combi boiler
Vokèra is a licensed member of the Benchmark scheme
which aims to improve the standards of installation and
commissioning of domestic hot water systems in the UK.
2
Dear Customer
Your Linea HE boiler has been designed to meet and exceed the very latest standards in gas central heating technology, and
if cared for, will give years of reliable use and efficiency.
Please therefore take some time to read these instructions carefully.
Do’s and Don’t’s
●Do ensure that the system pressure is periodically checked
●Do ensure that you know how to isolate the appliance in an emergency
●Do ensure that you are familiar with the appliance controls
●Do ensure that your installer has completed the appliance log book
●Do not attempt to remove the appliance casing or gain internal access
●Do not hang clothes etc. over the appliance
●Do not forget to have the appliance serviced annually.
Contents
Introduction Page
Dear customer 2
Do’s and don’t’s 2
Primary information 3
Secondary information 3
Things you should know Page
1.1 Gas appliances 4
1.2 Electrical supply 4
1.3 Guarantee registration card 4
1.4 Benchmark log book 4
1.5 How does it work? 4
1.6 Dimensions 4
1.7 Clearances required 4
1.8 Frost protection system 4
1.9 Additional controls 4
Getting started Page
2.1 Before switching on 5
2.2 Appliance controls 5
2.3 Lighting the boiler 5
2.4 Adjusting the operating temperatures 6
2.5 Temporary fault codes 7
2.6 Final fault codes 7
2.7 Information mode 7
How to... Page
3.1 Top-up the system pressure 8
3.2 Reset the appliance 8
3.3 Shut down the system for short periods 8
3.4 Shut down the system for long periods 8
3.5 Care for the appliance 8
3.6 Regulate the hot water temperature 8
What if... Page
4.1 I suspect a gas leak 9
4.2 I have to frequently to top-up the system 9
4.3 The reset light is on 9
4.4 The appliance is due its annual service 9
4.5 I need to call an engineer 9
INTRODUCTION
3
PRIMARY INFORMATION
CONTROLS INTERFACE
1
2
4
9
8
7
6
5
3
1 Info key
Enables the function that allows the access to some information
regarding the boiler operation.
2 Memory key
Enables the Memory function.
3 Heating temperature adjustment key
Allows the access to the adjustment of the heating water tem-
perature by using the selector.
4 ON/OFF/RESET key
Allows you to:
●switch on the boiler
●switch off the boiler
●restart the boiler after a fault stop.
5 Heating ON/OFF key
Enables/disables the heating function
6 Dedicated to the Technical Assistance Service
Enables or disables the boiler’s self-operation.
7 Encoder (adjustment selector)
Allows you to increase or decrease the preset values.
8 Comfort key
Enables Comfort function.
9 DHW temperature adjustment key
Allows the access to the adjustment of DHW temperature by
using the selector.
SECONDARY INFORMATION
DISPLAY
1 Reset symbol
Indicates when it is necessary to restart the boiler (please read
page 42 for details).
2 Key symbol
Indicates the presence of a fault (please read page 42 for
details).
3 Drop symbol
Displaying that the system pressure is under the correct level
4Displaying the operating temperature (DHW or heating).
5 Memory symbol
It is displayed when Memory function is on.
6 Heating symbol
Flashing, indicates a heating request in the room.
7 Heating layer
Indicates the position of the set heating temperature (position
relative to the maximum and minimum).
8When the heating flame is on, it indicates that the burner is on
following a heat request in the room.
9 Anti-freeze symbol
It is displayed when the anti-freeze function is on.
10 External probe symbol
It is displayed when the external probe is connected.
11 Remote control panel
It is displayed when a remote control panel is connected.
12 Service icon
Indicates the boiler is self-operating.
13 Pressure value of the heating installation.
14 Comfort symbol
It is displayed when the Comfort function is on.
15 DHW symbol
Flashing, indicates a DHW request.
16 DHW layer
Indicates the position of the DHW temperature set (position
relative to the maximum and minimum).
17 When the DHW flame is on, it indicates that the burner is on
following a DHW request.
°C
1
2
9
10
5
7
14
16
817
4
13
12
3
fig. 1
6
11
15
Product specificaties
| Merk: | Vokèra |
| Categorie: | CV Ketel |
| Model: | Linea ONE |
Heb je hulp nodig?
Als je hulp nodig hebt met Vokèra Linea ONE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding CV Ketel Vokèra
23 Juni 2023
18 Mei 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
Handleiding CV Ketel
- CV Ketel Bosch
- CV Ketel ATAG
- CV Ketel Junkers
- CV Ketel Nefit
- CV Ketel Remeha
- CV Ketel Vaillant
- CV Ketel A.O. Smith
- CV Ketel ACV
- CV Ketel AGPO
- CV Ketel AWB
- CV Ketel Brink
- CV Ketel Buderus
- CV Ketel Bulex
- CV Ketel Daalderop
- CV Ketel De Dietrich
- CV Ketel Elco
- CV Ketel Ferroli
- CV Ketel Intergas
- CV Ketel Itho
- CV Ketel Itho-Daalderop
- CV Ketel La Nordica
- CV Ketel Morco
- CV Ketel Nibe
- CV Ketel Saunier Duval
- CV Ketel Stiebel Eltron
- CV Ketel Thermona
- CV Ketel Truma
- CV Ketel Tzerra
- CV Ketel Viessmann
- CV Ketel Weishaupt
- CV Ketel Wolf
- CV Ketel Ygnis
- CV Ketel Oertli
- CV Ketel Baxi
- CV Ketel ROC
- CV Ketel Worcester
- CV Ketel Fantini Cosmi
- CV Ketel Masterwatt
- CV Ketel Mikoterm
- CV Ketel Ariston Thermo
Nieuwste handleidingen voor CV Ketel
4 Maart 2024
23 November 2023
23 November 2023
23 November 2023
14 November 2023
14 November 2023
14 November 2023
14 November 2023
14 November 2023
14 November 2023