Vocopro PV-802 Handleiding
Vocopro
Niet gecategoriseerd
PV-802
Bekijk gratis de handleiding van Vocopro PV-802 (18 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over Vocopro PV-802 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/18
The PV-802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter (sold separately).
NOTE: These speaker stand adapters are included with the purchase of VocoPro SS-88 speakers
stands. Contact your local VocoPro dealer to order a pair of VocoPro SS-88 speaker stands.
Attaching the Adapter to the Speakers
NOTE: The 4 mounting screws are included with the PV-802.
1. Remove the rubber pads covering the screw openings on the bottom of the PV-802 speakers to reveal the
holes for the mounting screws. (Fig A)
NOTE: DO NOT remove the screw that is already on the bottom of the PV-802 main speaker. This
screw is keeping the internal amp and mixer in place and must not be removed.
2. Align the slots on the flat part of the adapter with the holes on the bottom of the PV-802 speaker (Fig. B)
3. Screw in the screws, tightly fastening the adapter to the speaker.
NOTE: Make sure the adapter is attached firmly to the speaker.
Attaching the Speaker Stand Adapters
DO NOT
REMOVE
Rub
Rubber Pads/
Screw Holes
MAIN SPEAKER (BOTTOM) SECOND SPEAKER (BOTTOM)
Fig.A
Fig.B
1
Setting up the Speaker Stands
Setup each SS-88 speaker stand by extending the support lefts to a
position that is stable and tighten the tension mechanism firmly.
Each end of the SS-88 pole has a particular diameter fitted for
common speakers’ mounting cavities. If the SS-88 pole does NOT
fit flush into the mounting adapter on the PV-802
, loosen the SS-88
pole and reverse it in the stand and then remount the speaker.
Mounting the Speaker(s)
Once the adapter is securely attached to the speaker:
1. Place the PV-802 on the SS-88 speaker pole
2. Fasten the fastener on the adapter until it is secured tightly
3. Repeat this for the next speaker
Switching Voltage
The PV-802 has a voltage selector on the rear panel that switches between two voltage settings:
115V - North America, Canada, some South America
220V - Europe, Asia, some South America
Note: The PV-802 comes preset to 115V and will only need to be switched if it is being used in a
region that requires 220V.
To switch the voltage
1. Locate the voltage selector by removing the VOLTAGE SELECT sticker on the rear panel of the powered PV-802
speaker
2. Switch the selector to the proper voltage
CAUTION: Using the speakers while set to the wrong voltage can result in permanent damage and
will void the warranty. Make sure you have set the PV-802 to the correct voltage before using.
Mounting on a Speaker Stand / Voltage Selector
2
www.vocopro.com
Product specificaties
| Merk: | Vocopro |
| Categorie: | Niet gecategoriseerd |
| Model: | PV-802 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vocopro PV-802 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Vocopro
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Amaran
- LTC
- Interphone
- Delta
- X4-Tech
- Wire Technologies
- Elta
- Gourmetmaxx
- Apogee
- BluGuitar
- First Austria
- Berker
- Woods
- Fisher And Paykel
- Eura
Nieuwste handleidingen voor Niet gecategoriseerd
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025