Vocopro BT-1L Handleiding

Bekijk gratis de handleiding van Vocopro BT-1L (2 pagina’s), behorend tot de categorie Karaoke systeem. Deze gids werd als nuttig beoordeeld door 63 mensen en kreeg gemiddeld 4.3 sterren uit 3 reviews. Heb je een vraag over Vocopro BT-1L of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BT-1 User’s Guide

BT-1

BLUETOOTH

MUSIC RECEIVER

LINE

OUT

VOL

Getting Connected (For BT-1L only)

Pairing

Installation (For BT-1 only)

1. When powered, the BT-1/L will automatically be discoverable in

pairing mode (indicated by the blinking LED).

2. Go to the Bluetooth settings on your Bluetooth device and pair

the device labeled VOCOPRO. This will cause theLED to remain lit

signaling a successful pairing.

NOTE: If you are prompted for a password, use: 0000.

3. Use the volume knob to adjust volume of bluetooth audio output.

4. Enjoy your music!

1. Connect the power supply to the BT-1L and a power outlet.

2. Using the supplied 1/8” to 1/8” audio cable, connect one end to the audio output on the

BT-1, connect the other end to your powered speaker or audio system.

3. Install the antenna by aligning it to the center of the antenna input and turn clockwise.

1. Remove the expansion port cover plate from your compatible host unit.

2. Find the 6-pin cable and connect its connector to the 6-pin connector on the back of the BT-1.

3. Slide the BT-1 into the port and secure with the screws.

4. Install the antenna by aligning it to the center of the antenna input and turn clockwise.

1

1

Antenna

Connector

4

2 3

32

Antenna

Connector

NOTE: Do not connect 6-pin

connector and 5V power

adapter simultaneously.

Product specificaties