Vivotek AW-IHS-0202 Handleiding

Vivotek Niet gecategoriseerd AW-IHS-0202

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivotek AW-IHS-0202 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

LC - or -SC

POWER Green ON Power is on and normal.

Fiber

Link/Act

Green ON Fiber is attached.

Green Flashing Data is being transmitted / received.

LAN port

Green

Green ON TX link is detected.

Green Flashing Data is being transmitted or received.

LAN port

Amber

Amber ON 100M speed is detected.

Amber OFF 10M speed is detected.

1. Install the converter in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the converter are not blocked.

3. Use ber optic cables and transceiver compliant with the following: Multi-mode: 50/125um, 62.5/125um, 850nm;

Single-mode): 9/125um ,1310nm.

4. AC input (18~36V/AC, 50~60Hz), DC input (12V~60VDC). Follow the printed polarity for V+, V-, and Ground.

AW-IHS-0200 Industrial Media Converter

AW-IHS-0201

AW-IHS-0202

Quick Installation Guide

The AW-IHS-0200 series is a rugged media converter designed for critical and space-limited outdoor applications.

Designed for IP surveillance, trafc monitoring, and security applications in critical environments, the converter features a

wide range of VAC and VDC input range, and an operating temperature ranging from -40°C to 75°C.

IMPORTANT:

INTRODUCTION

LED DEFINITIONS

CONNECTION

* 1x media converter * 1x Quick Installation Guide

* 2x wall mount brackets * 1x DIN rail bracket

* 1x 3-pin terminal block

PACKAGE CONTENTS

1. Pull out the 3-pin terminal block.

2. Connect wires to V+, V-, and Ground.

3. Connect SFP transceiver or SC ber to the ber port.

4. install the 3-pin terminal block.

WARNING - Do not force SFP transceiver into the SFP

socket without removing the terminal block.

OFF

DIP 1 ON Converter mode

OFF Switch mode (default)

DIP 2 ON LFP enabled

OFF LFP disabled (default)

Converter w/ SC type connectors

for Multi-mode 2KM and single-mode 30KM

Converter w/ LC type socket

for Multi-mode 2KM and single-mode 30KM

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282 F: +886-2-82455532 E: sa les@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| | |T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

| | |T: +31 (0)36 5389 149 F: +31 (0)36 5389 111 E: sa leseurope@vivot ek.com

All specications are subject to change without noice.

Product specificaties

Merk:	Vivotek
Categorie:	Niet gecategoriseerd
Model:	AW-IHS-0202
Kleur van het product:	Zwart
Gewicht:	80 g
Breedte:	49 mm
Diepte:	59 mm
Hoogte:	36 mm
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP40
LED-indicatoren:	LAN, Power, Speed
DC voltage input:	18 - 36 V
Certificering:	CE, C-Tick, FCC, VCCI, LVD
Netwerkstandaard:	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag:	-40 - 85 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Ophangsysteem voor aan de muur:	Ja
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Nee
Switchingcapaciteit:	- Gbit/s
MAC-adrestabel:	1000 entries
Aantal basis-switching RJ-45 Ethernet-poorten:	1
Type basis-switching RJ-45 Ethernet-poorten:	Fast Ethernet (10/100)
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX
Wand montagekit:	Ja
Buffergrootte:	128 KB
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
DIN rail bevestiging:	Ja
Store-and-forward:	Ja
Klemmenblok inclusief:	Ja
Ondersteundende kabel types:	Cat3, Cat4, Cat5, Cat5e
Vezel-optische connector:	SFP
Fibre channel-poorten:	1
Packet forwarding rate (10 Mbps):	14880 pps
Packet forwarding rate (100 Mbps):	148000 pps
DIN-rail inbegrepen:	Ja