Vivotek AP-GIC-011A-030 Handleiding

Bekijk gratis de handleiding van Vivotek AP-GIC-011A-030 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over Vivotek AP-GIC-011A-030 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282F: +886-2-82455532E: sales@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| | |T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T E: +31(0)36-5298-434 : saleseurope@vivotek.com

Non-PoE Switch

Data INP+D OUT

100~240V AC

1. Use CAT5 or 5e UTP/STP cables.

2. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 65/100W.

AP-GIC-011A-060/095 PoE Injector

Quick Installation Guide

Model Description

AP-GIC-011A-06060W high power PoE output

AP-GIC-011A-09595W high power PoE output

(The PoE output should only be connected to an IP camera. It should not be connected to

non-PoE devices, such as a PC's LAN port)

IMPORTANT:

INTRODUCTION

CONNECTION

* 1x PoE injector* 1x AC power cord

* 1x Quick Installation Guide

PACKAGE CONTENTS

All specications are subject to change without noice.

Copyright © 2017 VIVOTEK INC. All rights reserved.

Installation Steps:

1. Connect the included AC power cord to the injector. The Power LED (Green) should be lit.

2. Connect the Data IN port to a LAN switch using an Ethernet cable.

3. Connect the Power+Data OUT port to a powered device, i.e., IP camera, using another Ethernet cable. Make sure the

PoE LED (Yellow) is lit.

4. Check if the powered device (IP camera) is working properly. An IP camera may take up to 1 or 2 minutes to power up.

Product specificaties