Vivotek AM-71H Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Vivotek AM-71H gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Revison History:
Rev. 1.0: Initial release
VIVOTEK Mounting Accessories
AM-71H_V2 Conduit Box
Installation Guide
Mounting Dimensions
Installation – Dome Camera Type
II
Compatible VIVOTEK Cameras
I
Accessory Ordering part no.: VIO900000083
Package Contents
Compatible cameras/brackets
AFD9368/FD9383-HTV/FD9388/FD9389-V2/FD9389-V3/FD9399
BIT9383/IT9388
CFD9360/FD9380/FD9383-HV
DIT9389-V3/IT9399/FE9380/FE9382-V2/FE9391-V2/FE9191-V2
ETB9332-E
FTB9333-E/TT9333-E
Ø141.8 × 51mm
T15
G3/4” Plug
* Ø8 rubber for:
AO-014, AO-015, IT9389-V3, IT9399
G3/4” Gland
M4 x 25 mm
x1
x1
x1
x4
x4
M4 x 10 mm
x4
ø4.5-5.5
x1
ø8*
x1
Remove the top cover.
Attach the included alignment sticker to a preferred position.
Drill holes on the wall and install the junction box. If space
behind the wall allows, you may also pass cables through
the wall.
Install the waterproof components of the cable gland to your
Ethernet cable following the QIG of your camera. The cable
gland will be placed within the protection of the box.
Pass the camera's Ethernet cable through the center hole
of the box and the rubber seal.
Secure the top cover by fastening 4 screws.A. FD9368/FD9383-HTV/FD9388/FD9389-V2/FD9389-V3/
FD9399
B. IT9383/IT9388
C. FD9360/FD9380/FD9383-HV
D. IT9389-V3/IT9399/FE9380/FE9382-V2/FE9391-V2/
FE9191-V2
E. TB9332-E
F. TB9333-E/TT9333-E
Make sure the rubber seal is properly installed to the
center hole. The outer rim of the seal must be through and
cover the edge of the hole.
Secure the top cover by fastening the corresponding
mounting holes.
Install the camera using the corresponding mounting holes
Choose the appropriate rubber seal
based on diameter of your cable
ø8 x1
ø4.5-5.5 x1
A 3/4" conduit is required for routing the cables with
waterproof connection.
1
3
5
487
6910
2
If using the bottom
hole, seal the center
hole.
Install the cable gland
and pass cables
through it.
OR
3/4”
Open a live view console and adjust the shooting direction.
Refer to camera QIG for more information. Secure the
camera top cover
FD9383-HV, FD9360, FD9380
IT9389-V3, IT9399
FD9389-V3, FD9399
FE9380, FE9382-V2, FE9391-V2, FE9191-V2
11
1
367
45
2
Installation – Turret Camera Type
Installation – Reference Pictures
III
IV
Loosen
Tighten
All specications are subject to change without noice.
Copyright © 2025 VIVOTEK INC. All rights reserved.
Please contact authorized distributors for warranty and RMA service.
Visit https://www.vivotek.com/support/warranty and https://www.
vivotek.com/support/rma
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|||T:+886-2-82455282F:+886-2-82455532E: sales@vivotek.com
Product specificaties
| Merk: | Vivotek |
| Categorie: | Niet gecategoriseerd |
| Model: | AM-71H |
Heb je hulp nodig?
Als je hulp nodig hebt met Vivotek AM-71H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden