Vivotek AM-71C Handleiding

Bekijk gratis de handleiding van Vivotek AM-71C (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Vivotek AM-71C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Revison History:

Rev. 1.0: Initial release

VIVOTEK Mounting Accessories

AM-71C Conduit Box

Installation Guide

Mounting Dimensions

Installation

II

Compatible VIVOTEK Cameras

I

Compatible cameras/brackets

A

: IT9360-H, IT9380-H

B

: IB9389 series, IB9360-H, IB9380-H, IB9368-HT, IB9388-HT

C

: FD9360-H, FD9380-H

A 3/4" conduit is required for routing the cables with waterproof

connection.

Remove the top cover and unhook the tether wire.

Install the cable gland and pass cables through it.

Loosen and remove the camera top cover. (Using one of

the supported cameras as an example)

Pass the camera's Ethernet cable through the center hole of

the box and the rubber seal.

1

2

4

5

6

7

8

Install the camera using the corresponding mounting holes with

the included hex socket screws.

Accessory Ordering part no.: 100220500G

x4

x4x4

Package Contents

A

: IT9360-H, IT9380-H

B

: IB9389 series, IB9360-H, IB9380-H, IB9368-HT, IB9388-HT

C

: FD9360-H, FD9380-H

5.5 ~ 6.4mm

5.5 ~ 6mm

Make sure the rubber seal is properly installed to the center

hole. The outer rim of the seal must be through and cover the

edge of the hole.

10

Install the waterproof components of the cable gland to your

Ethernet cable following the QIG of your camera. The cable

gland will be placed within the protection of the box.

If using the bottom hole,

seal the center hole.

OR

3/4”

9

Secure the top cover by fastening 4 hex socket screws.

Attach the included alignment sticker to a preferred position.

Drill holes on the wall and install the junction box. If space

behind the wall allows, you may also pass cables through the

wall.

3

Part no.: 625055100G

Product specificaties