Vivotek AM-21B Handleiding

Vivotek Bewakingscamera AM-21B

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivotek AM-21B (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

I P S u r v e i ll a n c e

Installation Guide

VIVOTEK Fixed Dome Series

Wall-mount Bracket

Using AM-21B wall-mount bracket

and compatible accessories

Rev. 1.0

Corresponding part number:

AM-21B: 100152800G

QIG part no.: 625039900G

Compatible VIVOTEK CamerasI

FD8166A, FD8166A-N, FD8166A-R

You may also refer to VIVOTEK's website for the list of supported models. Support for other models can

be available through time.

Installation

Below are the locations of mounting holes.

Mounting Hole Denitions

Revision History:

* Rev. 1.0: Initial Release

NOTE:

1. It is presumed that this wall-mount bracket is installed with a hole drilled on the wall for

routing power lines, DI/DO, and Ethernet cables.

2. Route cables before you secure the wall-mount bracket to a wall.

3. For details on the cable connections with each camera, please refer to their Quick

Installation Guide.

English

Refer to the table below for the description of the included screws:

Screw Description Quantity Applies to

M4X25XD9 Phillips pan

head

4 Securing the

bracket to wall

Plastic anchors 4 Securing the

bracket to wall

For cabling and conguration details with each network camera, please refer to their

documentation.

Wall Mount Installation

Below is a general, sample procedure using a wall mount bracket:

1. Locate the position where you want to install the wall mount bracket and camera. Drill

holes on the wall for securing the bracket and for routing the cables.

2. Secure the bracket by hammering anchors into the wall and then fasten screws through

the four mounting holes on the bracket.

Product specificaties

Merk:	Vivotek
Categorie:	Bewakingscamera
Model:	AM-21B
Kleur van het product:	Wit
Gewicht:	220 g
Breedte:	95 mm
Diepte:	143 mm
Hoogte:	89 mm
Gewicht verpakking:	400 g
Breedte verpakking:	174 mm
Diepte verpakking:	217 mm
Hoogte verpakking:	94 mm
Soort:	Support
Materiaal behuizing:	Aluminium
Ondersteuning voor plaatsing:	Universeel
Connectiviteitstechnologie:	Bedraad
Maximale gewichtscapaciteit:	- kg
Compatibiliteit:	FD8166A, FD8166A-N