Vivo DESK-CM3A-B Handleiding


Bekijk gratis de handleiding van Vivo DESK-CM3A-B (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.3 sterren uit 2.5 reviews. Heb je een vraag over Vivo DESK-CM3A-B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
Clamp-on Modular Cable Management Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-cm3a-b
SKU: DESK-CM3A-B
help@vivo-us.com
www.vivo-us.com 309-278-5303
Chat live with an agent!
2
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x3)
Tray
B (x1)
Clamp Bracket
C (x1)
Clamp
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x5)
M4 Washer
S-B (x5)
M4x5mm Screw
S-C (x2)
M4x10mm Screw
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Connect Trays together as shown below using M4x5mm Screws , M4 Washers , and a (A) (S-B) (S-A)
Phillips screwdriver. Secure Clamp Bracket (B) to underside of the center Tray using M4x5mm (A)
Screws , M4 Washers (S-B) (S-A), and a Phillips screwdriver.
S-B
A
S-A
B
2.2 lbs
(1 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Per Clamp
3
STEP 2 - Under Desk Assembly
STEP 2 - Reverse Facing
To assemble so that the tray sits under the desktop, install Clamp so that it faces the same (B)
direction as the tray assembly. Connect using M4x10mm Screws . Secure to desktop. (S-C)
To assemble so that the tray sits outside the desktop edge, install Clamp so that it faces the (B)
opposite direction as the tray assembly. Connect Clamp (B) to Clamp Bracket using M4x10mm (C)
Screws (S-C). Secure to desktop.
C
S-C
B
C
B
S-C
Adding Additional Tray Sets
If you purchased additional sets, connect together as shown below using M4x5mm Screws (S-B)
and M4 Washers (S-A). Repeat steps 2-3 to nish installation.
4 Trays
S-B
S-A


Product specificaties

Merk: Vivo
Categorie: Niet gecategoriseerd
Model: DESK-CM3A-B

Heb je hulp nodig?

Als je hulp nodig hebt met Vivo DESK-CM3A-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden