Vitek VTD-HOCMD2CH Handleiding

Vitek Bewakingscamera VTD-HOCMD2CH

Lees hieronder de đź“– handleiding in het Nederlandse voor Vitek VTD-HOCMD2CH (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
VITEK
VTD-HOCMD2CH
HD-SDI Vandal Resistant
Mini Dome 2.1 Megapixel
FEATURES:
• 1/3” 2.1Megapixel CMOS Sensor
•1080(1920x1080)@30fps
• 3.6mm Fixed Lens Included
• 2D-DNR - Two Dimensional Motion Adaptive Noise
Reduction
• Can be Semi-Flush or Surface Mounted
• IP-66 Rated Weather Resistant Aluminum Enclosure w/
Polished Chrome Finish
• 12VDC Operation
1
INSTALLATION
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cable (B) and video
cable (A) from the camera unit
through the cable hole in the ceiling.
4) Align the three screw holes in the
camera unit (C) with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws.
5) Use the supplied four screws (E) to
secure the middle base (D) to the
bottom base (C)
6) Tighten the guide ring (G), then
adjustment the camera (F).
7) Attach the bubble (H) to the middle
base (D).
8) Attach the top cover (I) to the middle
base (D).
9) Use the supplied star-shaded
L-wrench to tighten the set screw on
the top cover.
Open Close
2
SPECIFICATIONS
Image Device
Resolution
Effective Pixels
Minimum Illumination
Included Lens
Day/Night
Noise Reduction
Synchronization
S/N Ratio
Video Output
Electronic Iris
Construction
Water Resistance
Power Source
Power Consumption
Operating condition
Dimensions
Weight
1/3” 2.1Megapixel CMOS
1920x1080p(1080p/30fps)
1944(H)x1092(V) (2,122,848 Pixels)
0.1LuX / F2.0
3.6mm Fixed Megapixel lens
Auto
2D-DNR
Internal
More than 50dB
VBS 1Vpp +/-10%, 75ohm
1/60 ~ 1/100,000sec
Aluminum Housing with Polished Chrome Finish
IP-66
12VDC
150mA
14F ~ 122F (-10C ~ +50C) / 95% RH Max
3.15” x 1.69”/2.47” (80mm x 42.8mm/62.8mm)
14.11 Oz. (400g)
SPECIFICATIONS VT-HOCMD2CH


Product specificaties

Merk: Vitek
Categorie: Bewakingscamera
Model: VTD-HOCMD2CH

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTD-HOCMD2CH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Vitek

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera