Vitek VT-WAP2150 Handleiding

Bekijk gratis de handleiding van Vitek VT-WAP2150 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Vitek VT-WAP2150 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

www.vitekcctv.com

VITEK AIR SERIES HIGH SPEED 5.8GHZ

WIRELESS AP/CPE WITH POINT-TO-

MULTI-POINT (P2MP) TOPOLOGY!

With high speed transmission of 150MBps and a wireless range

of 1.25 miles (2km), the VITEK VT-WAP2150 eliminates the need

for expensive and troublesome long-distance cables in areas

where CCTV monitoring and rigorous surveillance take place.

This small, lightweight and durable unit is easy-to-install and easy

to use with an innovative and straightforward 10-button plug-and-

play dip switch that facilitates the creation of a robust wireless

network without a computer. Set-up can be simply configured for

point-to-point or point-to-multipoint topology depending on the

application, with up to 128 IP group configurations.

Air Series High Speed 5.8GHz PoE Wireless AP/CPE with

Point-to-Multi-Point (P2MP) Topology, 1.25 Mile Range

VT-WAP2150

•Advanced Qualcomm Atheros AR9344 600MHz Chipset

•64MB DDR2 Memory, 8MB Flash Storage

•Low interference, High Stability, 1.25 Mile (2km) Range

•Tool-free installation, with no computer necessary

•Innovative and easy-to-use 10-Switch DIP Function,

automatically syncs AP and CPE points

•Wirelessly connect up to 4 CPE points to one AP point for true

Point-to-Multi-Point (P2MP) Topology!

•128 IP Groups, Automatic Matching Transmission

•Compact and stylish exterior is made with durable, weather-

resistant ABS and PC Material (IP65 rating)

•Wired Equivalent Privacy (WEP), SNMP Management

Information Base (MIB), Telnet, and Serial Management

•Direct Sequence Spread Spectrum (DSSS) Transmission

•CSMA/CA, TCP/IP, IPX/SPX, NetBEUI, DHCP, NDIS3, NDIS4,

NDIS5 Protocol

•5180MHz~5240MHz / 5745MHz~5825MHz Channel

•12Dbi Antenna Gain, with Vertical Polarization and 4900

6100MHz

•WEP 64/128bits, WPA, WPA2, 802.1x Security Encryption

•IEEE802.11a, IEEE802.11n, IEEE802.3u Standard

•Dual 10/100Mbps Ethernet Ports

•PoE24V (1A) Injector Power Supply Included

•3-Year Warranty

KEY FEATURES

Sleek and compact design, with dual ethernet ports, and easy setup

with DIP switch configuration (computer not required).

8”

8”5.21”

VITEK POINT-TO-MULTI-POINT (P2MP) SYSTEM

Station 1

(CPE Point)

Access Point

(AP Point)

Station 2

(CPE Point)

Station 3

(CPE Point)

Wirelessly connect up to 4 CPE points to one AP point for true Point-to-Multi-Point

(P2MP) Topology, to create a dedicated wireless security network. Optionally,

connect a modem/router to the NVR, if remote access is desired.

Product specificaties