Vitek VT-SMKC1/H Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Vitek VT-SMKC1/H (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
VITEK
• Color CCD Image Sensor with 420 TV Lines (VT-SMKC1) /
550 TV Lines (VT-SMKC1/H)
• Minimum Illumination of 0.5 Lux
• Camera Mounted On Adjustable Gimbal To Achieve the
Perfect Viewing Angle
• 3.6mm Standard lens Included (Optional 2.8mm to 25mm
Available)
• Dimensions: 5.12” (OD) X 2.29” (H)
VT-SMKC1
VT-SMKC1/H
Side View Color Smoke Detector
Cameras
2
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
1. Unit contains uninsulated dangerous
voltage within the enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons
2. Only use DC Power Supply
3. Read & Keep these instructions.
4. Heed to all warnings and follow all
instructions carefully.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
install in accordance with the
instructions.
8. Do not install near any heat source
such as radiators, heat resisters,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has to blades with one
wider the other. A grounding type plug
has to blades and a third grounding
plug. The wide blade or the third prong
are provided for safety. if the provided
plug dose not fit into your into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on a pinched particularly at
plugs, convenience receptacle, and
the point where they exit from the
apparatus.
11. Only use attachment/accessories
specified by VITEK.
12. Use only with cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the Unit,
13. Unplug this unit during lightning
storms or when unused for long
periods of time.
14. Refer all servicing to qualified service
personnel, Servicing is required when
the unit has been damaged in any way,
such as power-supply cord or plug
is damaged, liquid has been spilled
or objects have fallen into the unit,
the unit has been exposed to rain or
moisture, does not operate normally or
has been dropped.
15. Do not attempt to service this product
yourself as opening or removing covers
may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personal.
CAUTION - To reduce the risk of electric
shock, do not perform any servicing
other than contained in these operating
instructions unless you are qualified to do
so.
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
S/N Ratio
Electronic Shutter
AGC
Sync. Mode
Scanning System
Gamma Correction
Horizontal Sync. Frequency
Vertical Sync. Frequency
Video Output
Power Source
Power Consumption
Operation Temperature
Standard Lens
Dimensions (W x H)
Weight
0.5 Lux
More Than 48dB
1/60 to 1/100,000 sec.
On
Internal Sync.
2:1 Interlace
0.45
15.734KHz
60Hz
Composite: 1.0 Vp-p / 75 Ohm
12 VDC
-10° ~ 50°C (14° ~ 122°F) Less Than 80% RH
f3.6mm (Optional 2.8mm to 25mm Available)
5.12” x 2.29” (130 x 58mm)
12.34 Oz. / 350 g. / 0.77 Lbs.
SPECIFICATIONS VT-SMKC1 VT-SMKC1/H
SPECIFICATIONS
1/4” DSP Color
510 x 492
420 TV Lines
120mA
1/3” DSP Color
768 x 492
550 TV Lines
300mA


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VT-SMKC1/H

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VT-SMKC1/H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd