Vitek VT-PIRC2 Handleiding
Vitek
Niet gecategoriseerd
VT-PIRC2
Bekijk gratis de handleiding van Vitek VT-PIRC2 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over Vitek VT-PIRC2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
VITEK
• Color CCD Image Sensor with 420 TV Lines (VT-PIRC2) /
550 TV Lines (VT-PIRC2/H)
• Minimum Illumination of 0.2 Lux / 0.5 Lux (VT-PIRC2/H)
• Pinhole 3.8mm / f2.0 Lens Included
• NC/C/NO Alarm Output
• Working 100’ Motion Detection Using 58 Beams Within 3
layers (35’ x 35’ Coverage Area)
VT-PIRC2
VT-PIRC2/H
Color PIR Cameras
2
PIR BOARD LAYOUT
1. LED: When an intrusion is detected, the LED will activate.
2. J2: Pulse count setting.
Relay will activate when an intrusion is detected once. (For stable 1-2 short (default):
environments or high risk operating environments)
Relay will activate when an intrusion is detected twice within 15 seconds.2-3 short:
(For harsh environments)
3. J1: Relay output select.
For outer control used in area where DC12V is requested (Limited at 200mA).Short:
N.C. = DC12V outNormal:
N.O. = DC12V outActivate:
Caution! Risk of electric shock. Set-up and operation should be
performed by authorized service person only.
Open (default): Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at
AC240V)
C & N.C. short / C & N.O. open.Normal:
C & N.C. open / C & N.O. short.Activate:
4. VR1: Sensitivity adjustment.
Turn clockwise for low sensitivity, turn counter-clockwise for high.
5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
C: NO: NC: BLACK WHITE RED
7. J3: LED on/off
Open: LED off Short: LED on
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/500mA OUT (for CCD MODULE)
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
PIR Detection Range
PIR Alarm Output
AGC
S/N Ratio
Video Output
Auto Electronic Shutter
Standard Pinhole Lens
Power Source
Power Consumption
Operation Temperature
Humidity
Dimensions (WxHxD)
100° / 35’ x 35’ Coverage Area
NC/N/NO
>18db
More Than 48dB
Composite: 1.0 Vp-p / 75 Ohm
1/60 to 1/100,000 sec.
3.8mm / F2.0
12VDC (300mA Regulated)
150mA
14°F ~ 140°F (-10°C ~ 60°C)
0-95%
2.75” x 4.72” x 1.69” / 70mm x 120mm x 43mm
SPECIFICATIONS VT-PIRC2 VT-PIRC2/H
SPECIFICATIONS
1/4” Color CCD
510 x 492
420 TV Lines
0.2 Lux
1/3” Color CCD
811 x 508
550 TV Lines
0.5 Lux
**12VDC Regulated power adapter 12V must be used otherwise
the device will be damaged and un-repairable.
Product specificaties
| Merk: | Vitek |
| Categorie: | Niet gecategoriseerd |
| Model: | VT-PIRC2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vitek VT-PIRC2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Vitek
8 Juli 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
16 Juni 2023
Handleiding Niet gecategoriseerd
- Digitus
- SEIKI
- Wehkamp
- Bellini
- SilentiumPC
- Elipson
- Trendnet
- Premier
- BabyHome
- Mobicool
- Viscount
- Reber
- OXO Good Grips
- Sport-Tronic
- SoundLAB
Nieuwste handleidingen voor Niet gecategoriseerd
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025