Vitek VT-6407 W Handleiding

Vitek Weerstation VT-6407 W

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VT-6407 W (32 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Weather station

Метеостанция

VT-6407 W

VT-6407_IM_18x14.indd 1 15.05.2013 14:19:35

MODE ALARM MEMORY

RESET

'&9

12 3

4 6 8

5 7

VT-6407_IM_18x14.indd 2 15.05.2013 14:19:35

ENGLISH

WEATHER STATION

Before connecting, operating or adjusting the

unit read the instruction carefully. Follow all

warnings and recommendations, specified in

this instruction.

Keep the instruction for further reference.

Safety measures

• Before operating the unit, read the

instruction carefully.

• Do not immerse the units into water.

• Do not use abrasives or substances caus-

ing damage of body and inner unit parts

for cleaning.

• Do not subject the units to impacts (dust

and moisture are also to be avoided), as it

can lead to failures, reduction of service

life, battery damage and to deformation

of the unit body parts.

• If you break the unit, it will lead to war-

ranty cancellation. No parts inside the unit

require user’s attention.

• For children’s safety do not leave polyeth-

ylene bags, used as a packaging, unat-

tended.

• Attention! Do not allow children to play

with polyethylene bags or packaging film.

Danger of suffocation!

• Keep the unit away from children.

• Do not allow children to use the unit as

a toy.

• This unit is not intended for usage by

children or disabled persons unless they

are given appropriate and understandable

instructions by a person who is respon-

sible for their safety on safety measures

and information about dangers that can

be caused by improper usage of the unit.

• Use only new batteries specified in the

instruction. Do not use a new and an old

battery or batteries of different brands at

the same time.

• Long remote sensor operation under low

or high temperatures can reduce voltage

of its batteries that causes decreasing of

transmission range.

• Do not dismantle the unit by yourself, con-

tact the nearest authorized service center

if any damage is detected.

DESCRIPTION

Main unit (Pic. 1)

1. Display

2. Display illumination and alarm repeat but-

ton LIGHT/SNOOZE

3. AL1, AL2 alarm time indication / display

sectors switching, setting confirmation

button MODE.

4. Alarm time indication, alarm on/off button

ALARM

5. Pressure unit selection / value setting

button ▲

6. Temperature unit selection (°С/°F) / value

setting button ▼

7. Button for indication of maximal/minimal

temperature and humidity values regis-

tered by main unit and remote sensor

MEMORY

8. RESET button

9. Battery compartment lid

10. Adapter jack (DC 4,5 V)

11. Stand

Remote sensor (Рic. 2)

12. Wall mounting hole

13. Battery compartment

14. Outdoor wired sensor socket

15. Outdoor wired sensor

Before the first use

Unpack the unit and remove packing materi-

als. Check the unit for damages. In case of

damages do not switch the weather station on.

Note:

– If the unit has been exposed to negative

temperatures, keep it under room tem-

perature for 30 minutes before its first

switching on.

VT-6407_IM_18x14.indd 3 15.05.2013 14:19:35

Product specificaties

Merk:	Vitek
Categorie:	Weerstation
Model:	VT-6407 W
Kleur van het product:	Wit
Ingebouwd display:	Ja
Alarm functie:	Ja
Klok functie:	Ja
Meetfuncties:	Indoor barometer, Indoor thermometer, Outdoor barometer, Outdoor thermometer
Meetfuncties trend display:	Barometer, Thermometer
weerstation extremum data:	Barometer, Thermometer
Weersvoorspelling:	Ja
Type batterij:	AAA
Min/Max temperatuur geheugen:	Ja
Aantal batterijen (sensor):	2
Meetfuncties grafisch display:	Ja
Oudoor sensorbereik:	50 m