Viotek NB27C Handleiding

Viotek Monitor NB27C

Lees hieronder de đź“– handleiding in het Nederlandse voor Viotek NB27C (12 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
NB27C
CURVED LED MONITOR
USER’S MANUAL
All specifications and informations are subject to change without notice.
-0-
VIOTEK
USER MANUAL
Read and observe the following warnings and information below. Viotek shall not
be held responsible for injury or damage of products or persons due to failure to
adhere to these precautions.
Safety Precautions and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources ex: portable heater or
heating vent, as this may cause damage to your monitor.
5. Do not spray cleaner and/or any kind of liquid directly onto the monitor’s
screen.
6. Do not insert anything into any part of the monitor including the ventilation
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of time where it will not
be used.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not attempt to dissemble the monitor or remove parts from this monitor.
Any disassembly or modification etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Viotek shall not be held responsible for injury or damage of products or persons
due to failure to adhere to the aforementioned precautions or any others noted
hereafter.
All specifications and informations are subject to change without notice.
-1-
Box Contents
1x Monitor
1x Power Cable (AC 100-240V 50/60Hz)
1x VGA Video Cable
1x Warranty Card
1x User manual
Basic Setup
1. Insert one end of the VGA video cable into your PC’s graphics card. DVI or
HDMI may also be used, cables not included.
2. Connect the other end of the video cable to the corresponding connector
on your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to
your power source such as a wall outlet or surge protector. It is
recommended to use a surge protector.
4. Turn on your monitor.
Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Please ensure your
PC is on and all video cables are fully inserted and/or connected.


Product specificaties

Merk: Viotek
Categorie: Monitor
Model: NB27C

Heb je hulp nodig?

Als je hulp nodig hebt met Viotek NB27C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Viotek

Viotek

Viotek NB32CW Handleiding

21 Februari 2024
Viotek

Viotek GN32LD Handleiding

21 Februari 2024
Viotek

Viotek GN32C Handleiding

21 Februari 2024
Viotek

Viotek GN35LD Handleiding

21 Februari 2024
Viotek

Viotek GFV24CB2 Handleiding

21 Februari 2024
Viotek

Viotek NB27C Handleiding

21 Februari 2024
Viotek

Viotek GN34CW Handleiding

21 Februari 2024

Handleiding Monitor

Nieuwste handleidingen voor Monitor