Vicoustic Pulsar Panel Handleiding


Bekijk gratis de handleiding van Vicoustic Pulsar Panel (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Vicoustic Pulsar Panel of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
EN
Pulsar Panel
Installation Manual
EN
MATERIAL NEEDED
Included
Pulsar Panel x16
Measuring Tape
Level
Not Included
EN
!
1
2
Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have
unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material manufactured
especially for the purpose), to equalize the absorption between the gypsum board face paper, joint compound, and skin
coating materials. You should then apply the paint, and allow air circulation in order to dry the paint within the time
frame specied by the paint manufacturer. Please ensure the paint is dry before installing the acoustic panel. Make sure
the room has all the necessary conditions to receive the acoustic panels. After you apply the glue on the back of each
acoustic panel, please ensure you hold the acoustic panel against the wall the required time (mentioned above), and
ensure it stays xed in place. This method is also applicable to ceiling installations.
To ensure that you maximise the strength of the glue, don’t make any adjustments
to the panel after bonding
Place the panel on the suitably
chose position on the wall. Once
in the desired place, press rmly
against the wall for 15 seconds.
Apply the glue on the back of the
acoustic panel, near
the edges. Do not wait longer than
10 minutes after applying the glue
to attach the panel to the wall.
50mm
Cut the tip of the glue nozzle according to the diagram.


Product specificaties

Merk: Vicoustic
Categorie: Niet gecategoriseerd
Model: Pulsar Panel

Heb je hulp nodig?

Als je hulp nodig hebt met Vicoustic Pulsar Panel stel dan hieronder een vraag en andere gebruikers zullen je antwoorden