Vevor DT1210-DM-BLK Handleiding

Bekijk gratis de handleiding van Vevor DT1210-DM-BLK (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Vevor DT1210-DM-BLK of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DT1210-DM-BLK

0102

0506

0304

Technical Support and E-Warranty Certificate

www.vevor.com/support

Handleset Dook Lock

First, loosen the screw tube and adjust the

distance accordingly. Then use a wrench

to tighten the screw tube. After this process

can be continued for installation.

BACKSET

handle

the template

the door.

the hub of the

deadbolt in a vertical position.

Attach the inner trim with a

2.5 (64mm) machine screw

and tighten it securely.

Follow the instructions on the template.

THE LATCH IS PLACED IN THE LOWER HOLE.

The

hub must be down,and the bolt must be

extended.Secure with two wood screws.

the lower hole with the bevel

the door jamb.

$GGUHVV6KXDQJFKHQJOXQRQJKDR$VKLEDRVKDQTX

VKDQJKDL&1

,PSRUWHGWR$866,+$237</7'52.(9$675((7($67:22'

16:$XVWUDOLD

,PSRUWHGWR86$6DQYHQ7HFKQRORJ\/WG6XLWH$QDKHLP

3ODFH5DQFKR&XFDPRQJD&$

ZW

(&URVV6WX*PE+

0DLQ]HU/DQGVWU)UDQNIXUWDP0DLQ

ZWh<

<+&2168/7,1*/,0,7('

&2<+&RQVXOWLQJ/LPLWHG2IILFH&HQWXULRQ+RXVH

/RQGRQ5RDG6WDLQHVXSRQ7KDPHV6XUUH\7:$;

Measure from the door face (jamb side) to the center of a latch.

Center strike screw holes on the vertical center line and

outline strike.

Chisel out the wood so the strike is ush with the frame.

Smear coloring on the dimple of the bolt. Retract the bolt and close the door. Extend the bolt, leaving a mark on the

door jamb.

Drill a 1"(25.4mm) diameter hole, 1-1/4" (29 mm) deep, in the door frame centered on the mark made from

Center strike over hole & trace around strike. Chisel out the door frame until the strike is ush.

FOR SECURITY STRIKE: Position strike with large holes toward the door stop. Pre-drill large holes 3" (76 mm) deep. Attach

wood screws in smaller holes.

Product specificaties