Vestil TDT-100-MD Handleiding


Pagina's 2 Niet gecategoriseerd

Bekijk de handleiding van Vestil TDT-100-MD gratis online of download de PDF. 6 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

Rev. 2/16/2015 TDT-100-MD, MANUAL.doc
Copyright 2015Vestil Manufacturing Co.
Page 1 of 2
TDT-100-MDERIES SMEDIUM DUTY MOLDED POLYURETHANE BINS (1YD
3
)
AM SSEMBLY ANUAL
lete bin assembly
FIG. 1B: Fasten carriage to bin
VMESTIL ANUFACTURI
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone:(260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestil.com e-mail: [email protected]
FIG. 1A: Attach casters
Step 2: Faste
n the carriage to the underside of the bin at
the four locations highlighted with light-colored arrows
below. To attach the carriage to the bin, use the 4 large hex
head screws provided with the product. Insert the screws
through slots in the cross rails of the undercarriage and into
the bin as shown in FIGS. 1A & 1B.
Step 3: Slide a wheel onto each end of the axle. The threaded ends of
the axle should project from the wheel hubs. Secure each wheel to the
axle with hex nuts as shown in FIG. 1C.
FIG. 1C: Attach wheels to axle
Tighten hex nut against metal
hub to secure wheel on axle
Step 1: Fasten the casters (2) to the undercarriage.
[NOTE: Attach casters before fastening undercarriage to
bottom of bin.] Referring to FIG. 1A, insert the threaded
stem of each caster into the threaded bolt hole in the side
rail (of the undercarriage); then install hex nuts on the
ends of the stems and tighten the nuts against the side
rail.
Carriage
Side rail of carriage
Hex head
screw
Cross
rail
Large hex head screw

Beoordeel deze handleiding


Product specificaties

Merk: Vestil
Categorie: Niet gecategoriseerd
Model: TDT-100-MD

Heb je hulp nodig?

Als je hulp nodig hebt met Vestil TDT-100-MD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden