Vestil CYL-H-16 Handleiding

Bekijk gratis de handleiding van Vestil CYL-H-16 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over Vestil CYL-H-16 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Rev. 1/26/2015 CYL-H, manual.doc

Copyright 2015 Vestil Manufacturing Co. Page 1 of 5

CYL-HSeries Cylinder Storage Cabinets

Assembly and Maintenance Manual

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging; then inspect

the product closely to determine whether it sustained damage during transport. If damage is discovered during the

inspection, immediately record a complete description of the damage on the bill of lading. If the product is undamaged,

discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used

is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:

a) Instructions in this manual; or

b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages

sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product.

VESTIL MANUFACTURING CORP.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail: [email protected]m

Table of Contents

Product Specifications…………………………………..……………………………………………………………. ………………2 - 3

Signal Words….…………………………………………………………………………………………………………….…………. …. 3

Safety Recommendations………………………………………………………………..…………………………………………… …. 3

Anchor cabinet to the ground……………………………………….………………………………………………………………... …. 4

Loading the cabinet………………………..…………………….……………………………………………………………………. …. 4

Inspections & Maintenance…………………………………………………………………………………………………………… …. 4

Label Placement Diagram……...…………………………………………………………………………………………………….. …. 4

Limited Warranty…...………………………………………………………………………………………………………………….. …. 5

Product specificaties