Vestil AHTD-3648 Handleiding

Bekijk gratis de handleiding van Vestil AHTD-3648 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over Vestil AHTD-3648 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

04/04/2025

AHTD,BTA,TAS,TS

V

ESTIL MFG.CO.1

VESTIL MANUFACTURINGCOMPANY

2999 N. Wayne St., Angola, IN 46703

Ph: 260-665-7586 ·Fax: 260-665-1339

E-mail: [email protected] · Website: www.vestil.com

MODEL DOCKBOARDS

Serial number ____________

Operation Instructions ……………………….……… 2

Routine Maintenance ………………..…………….… 2

Safety Label Identification ………………………... 3

Warranty …………………………………….….….. 3

IMPORTANT NOTES,WARNINGS AND SAFETY INSTRUCTIONS

Ensure that all employees understand and follow the following.

Failure to read and understand this owner’s manual before using or

servicing the DOCK BOARD constitutes a misuse of the product. All

persons who will install, use, or care for this product must be familiar

with this material.

oEnsure that all information / safety / warning labels stay in place and

remain legible.

oDo not use the DOCK BOARD if any damage or unusual noise is observed.

Do not perform any modifications to the DOCK BOARD without the

manufacturer’s approval. Failure to receive authorization for changes to

the equipment could void the warranty.

Maintenance and repairs are to be done only by personnel qualified to

perform the required work. Consideration will not be given for warranty

repair charges without prior written authorization by the manufacturer.

WHEN ORDERING

REPLACEMENT PARTS:

We take pride in using quality

parts on the equipment we

manufacture. We are not

responsible for equipment

problems resulting from the use

of unapproved replacement

parts.

To order replacement or

spare parts for this equipment,

contact the factory.

In any communication with

the factory please be prepared

to provide the machine’s serial

number, which is indicated on

the machine dataplate.

RECEIVING INSTRUCTIONS

It is possible that this product

could incur damage during

transit.

Inspect the unit closely when

it arrives. If you see evidence

of damage or rough handling to

either the packaging or to the

product when it is being

unloaded, immediately make a

note of it on the Bill Of Lading!

It is important that you

remove the product’s packaging

upon its arrival to ensure that

there is no concealed damage

or to enable a timely claim with

the carrier for freight damage.

Also verify that the product

and its specifications are as

ordered.

OWNER’S

M

ANUAL

Product specificaties