Vemer FR NTC-2DA Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vemer FR NTC-2DA (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
1-2 Channel Regulators for Digital Refrigeration System Manuel
Regolatori per
Refrigerazione
Digitali
FR... 1-2 canali
Manuale d’Uso
- 19 -
User Manual Refrigeration Regulators
Contents
Safety warnings Page 20
Technical specifications Page 20
Description of instrument Page 22
Electrical connections Page 23
Glossary Page 23
Operation Page 25
Setting the regulation parameters Page 25
Parameter menu Page 27
Error messages Page 33
Reference standards Page 33
Dimensions and connection diagrams, 33x75 mm Page 34-35
Dimensions and connection diagrams, 4-DIN Page 36
English
- 20 -
User Manual Refrigeration Regulators
During the installation and operation of the instrument, the following
safety instructions should be followed:
1) The instrument should be installed by qualified personnel
2) Read the instructions in this manual carefully
3) Carefully follow the instruction diagrams to install the device
4) Before gaining access to the connector terminals, make sure the conductors
to be connected to the instrument or already connected are not powered
5) Make sure the electric panel in which the device is inserted will prevent
access to the terminals after installation
6) Do not supply power to the device if any part of it is damaged
The instrument must be installed and activated in compliance with current
electric systems standards.
7)
The connection cables should be able to resist the maximum operating
temperature in the form of the maximum ambient temperature + 20 °C
8)
The instruments guarantee main insulation between the low voltage parts
(250 V) and the extremely low voltage parts
10)
9)
Series
Series of digital thermoregulator for regulating the temperature that execute
1B type actions (EN 60730-1).
of digital temperature regulators that satisfy the simplest requirements in
the field of refrigeration. They may be used as regulators for the handling of:
- Static refrigeration units (with no fan on the evaporator) operating at normal
temperatures (over 0° C)
The temperature probe to be used is the NTC type. It is also possible to connect
a second probe to display the product conservation temperature
The instruments are available in the following versions:
- FR NTC-… with 1 or 2 relay outputs in exchange for the handling of static
refrigeration units. In the two relay model, the second relay is dedicated to the
handling of the maximum and minimum alarms.
Indicated for the handling of STATIC refrigeration units (with no fans on the
evaporator) operating at temperatures greater than 0 °C.
The regulator performs all the functions of a thermometer, with the display of the
temperature, and an electronic thermostat, with the activation of a compressor or
TECHNICAL SPECIFICATIONS
SAFETY WARNINGS
Any outside switches connected to the control panel should guarantee
a minimum insulation of 250 V AC at operating temperature, or should be
protected by equivalent insulation
IMPORTANT: In order to avoid malfunctions, the differential of intervention
(DF1 or DF2 parameter) should not be set above 30 °C.
English


Product specificaties

Merk: Vemer
Categorie: Niet gecategoriseerd
Model: FR NTC-2DA

Heb je hulp nodig?

Als je hulp nodig hebt met Vemer FR NTC-2DA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vemer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd