Velodyne DLS-4000R Handleiding

Velodyne Subwoofer DLS-4000R

Lees hieronder de 📖 handleiding in het Nederlandse voor Velodyne DLS-4000R (9 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

User's Manual

DSP-Controlled Home Theater Subwoofer

DLS

T M

-R Series

• DLS-3500R

• DLS-3750R

• DLS-4000R

• DLS-5000R

Caution

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing

to qualiﬁed service personnel.

The lighting ﬂash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to

persons.

The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the subwoofer.

1. Read Instructions -- All safety and operating instructions should be read before the subwoofer is operated.

2. Retain Instructions -- The safety and operating instructions should be retained for future reference.

3. Heed Warnings -- All warnings on the subwoofer and in the operating instructions should be adhered to.

4. Follow Instructions -- All operating and use instructions should be followed.

5. Water and Moisture -- The subwoofer should not be used near water -- for example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like.

6. Carts and Stands -- The subwoofer should be used only with a cart or stand recommended by the

manufacturer.

7. Wall or Ceiling Mounting -- The subwoofer should be mounted to a wall or ceiling only as recommended by

the manufacturer.

8. Ventilation -- The subwoofer should be situated so that its location or position does not interfere with its proper

ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that

may block the ventilation openings; or placed in a built-in installation such as a bookcase or cabinet that may

impede the ﬂow of air through the ventilation openings.

9. Heat -- The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves,

or other subwoofers that produce heat.

10. Power Sources -- The subwoofer should be connected to a power supply only of the type described in the

operating instructions or as marked on the subwoofer.

11. Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point at which they exit from the subwoofer.

12. "Caution: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted." "Attention: Pour

eviter les chocs electriques, introduire lame la plus large de la ﬁche dans la borne correspondante de la prise

et pousser jusqu' au fond".

13. Cleaning -- The subwoofer should be cleaned only as recommended by the manufacturer.

14. Nonuse Periods -- The power cord of the subwoofer should be unplugged from the outlet when left unused

for a long period of time.

15. Object and Liquid Entry -- Care should be taken so that objects do not fall and liquids are not spilled onto

the enclosure.

16. Damage Requiring Service -- The subwoofer should be serviced by qualiﬁed service personnel when:

a. The power-supply cord or plug has been damaged.

b. Objects have fallen or liquid has been spilled into the subwoofer.

c. The subwoofer has been exposed to rain.

d. The subwoofer does not appear to operate normally or exhibits a marked change in performance.

e. The subwoofer has been dropped or damaged.

17. Servicing -- The user should not attempt to service the subwoofer beyond what is described in the operating

instructions.

All other servicing should be referred to qualiﬁed service personnel.

NOITUAC

KCOHS CIRTCELE FO KSIR

NEPO TON OD

Congratulations!

Congratulations on your purchase of a Velodyne Distortion Limiting

System

Remote (DLS

-R) subwoofer. This system represents the

state-of-the-art in low frequency reproduction. Read and follow the

instructions below to insure safe and proper system operation.

Warning!

To prevent ﬁre or shock hazard, do not expose this equipment to rain

or moisture. To avoid electrical shock, do not open speaker enclosure

or amp chassis cover. Please observe all warnings on the equipment

itself. There are no user serviceable parts inside. Please refer all

service questions to your authorized Velodyne dealer.

Prior to Installation

Please unpack the system carefully. Remove all staples used to seal

the carton as they can scratch the cabinet. Please save the carton

and all packaging materials for future use. Record the serial number

in the space provided on the warranty card for future reference.

Product Features and Controls

• DSP-controlled

• 4 selectable presets for customized listening mode

• Night-mode setting

• Mute control

• Built-in 160 watt (RMS) power ampliﬁer (DLS-3500R)

• Built-in 185 watt (RMS) power ampliﬁer (DLS-3750R)

• Built-in 200 watt (RMS) power ampliﬁer (DLS-4000R)

• Built-in 1000 watt (RMS) power ampliﬁer (DLS-5000R)

• Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer

Direct setting

• Speaker-level inputs and outputs

• 85 Hz high-pass crossover

• Line-level inputs

• Signal sensing auto turn on/off with bypass option

• Variable volume control

• Selectable phase control (0, 90, 180, or 270 degrees)

• Dual staggered low-pass crossover; 12 dB/octave initial,

24 dB/octave ultimate

• Anti-clipping circuit

• Over excursion protection

• Slot loaded design

Installation

Your new subwoofer system provides for a number of installation

options. Read all the installation information below in order

to determine which installation option is best for your system.

Remember to perform all installation procedures with system power

turned off.

Figure 1. DLS-3500R, DLS-3750R and DLS-4000R

Rear Panel Connections

Figure 2. DLS-5000R Rear Panel Connections

Rear Panel Connections

Figure 1 shows the connections on the rear panel of the DLS-3500R,

DLS-3750R and DLS-4000R. Figure 2 shows the connections on the

rear panel of the DLS-5000R.

Following are brief descriptions of the connections described in

Figures 1 and 2. More detail on these connections can be found

on the next page.

(1) LOW-PASS CROSSOVER

Use this knob to select the high-frequency range at which you

wish to cut off the signal to the subwoofer. When the knob is

turned all the way to the left, the Subwoofer Direct feature is

invoked and the subwoofer plays all frequencies up to 200 Hz.

(2) VOLUME Control

This control allows you to balance the output from the subwoofer

to the main speakers in your system. This control should be

set to achieve similar volume level from between both the main

speakers and subwoofer. When pressing volume up or down,

the speed at which the power light blinks indicates subwoofer

volume - the faster the blinking, the louder the unit plays. After

the volume blinking stops, the unit will blink out the actual volume

number. Slower blinks represent tens, and faster blinks represent

ones. So, for example, if the volume were set at 34, after the rapid

blinking stopped you would observe three slow blinks followed

by four faster blinks, indicating a volume of 34.

Note: Volume is also controllable by using the supplied remote,

when defaults are restored. The default is 35 out of 100.

(3) AUTO ON/OFF Switch

Use this switch to select between auto-on (active) and constant

on (inactive) operation.

(4) LINE OUTPUT

Connect these jacks to the LINE IN preamp input to use the

DLS-R’s internal high pass crossover. See below for a more

detailed explanation of this crossover.

Product specificaties

Merk:	Velodyne
Categorie:	Subwoofer
Model:	DLS-4000R

Heb je hulp nodig?

Als je hulp nodig hebt met Velodyne DLS-4000R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Subwoofer Velodyne

Velodyne Deep Waves 10 Handleiding

27 Maart 2024

Velodyne Deep Waves 12 Handleiding

27 Maart 2024

Velodyne MicroVee X Handleiding

21 Februari 2024

Velodyne DLS-4000R Handleiding

21 Februari 2024

Velodyne Deq-8R Handleiding

21 Februari 2024

Velodyne EQ-Max 8 Handleiding

21 Februari 2024

Velodyne Impact X10 Handleiding

21 Februari 2024

Velodyne MicroVee Handleiding

21 Februari 2024

Velodyne WiConnect 10 Handleiding

21 Februari 2024

Velodyne Impact X12 Handleiding

21 Februari 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

RCF S 19 Handleiding

10 April 2024

RCF S 29 Handleiding

10 April 2024

KEF KC92 Handleiding

6 April 2024

Klipsch Reference Premiere RP-1200SW Handleiding

3 April 2024

Klipsch Reference Premiere RP-1000SW Handleiding

3 April 2024

Klipsch PRO-1000SW Handleiding

27 Maart 2024

Totem KIN Sub Handleiding

27 Maart 2024

Kanto SUB8V Handleiding

27 Maart 2024

Canton Sub 10.4 Handleiding

26 Maart 2024

Canton Sub 12.4 Handleiding

26 Maart 2024