Veho VCC-A001-ESP Handleiding

Veho Niet gecategoriseerd VCC-A001-ESP

Lees hieronder de đź“– handleiding in het Nederlandse voor Veho VCC-A001-ESP (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 136 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Muvi Extreme Sports Pack – Accessories Guide
Contents
1 x muvi additional spring mounting clip
1 x mounting bracket for bike/helmet
1 x magnetic mounting bracket for wall
1 x muvi silicon protective sleeve
1 x muvi arm strap
1 x muvi head/helmet strap
1 x mounting bracket Velcro
2 x mounting bracket screws
3 x mounting bracket straps
Fastening to a bike
1. Clip the muvi into the bike mounting clip.
2. Using the Velcro straps, thread the thinnest end of one of
the straps through the bike mount and wrap securely around
where you wish to mount the muvi (handle bar, fork, seat post,
etc)
3. Thread the second Velcro strap into the mounting clip and
secure tightly in the same way.
4. If you want to make it extra secure you can use the 3rd
Velcro strap in a figure of 8 around the handle bar and
mounting bracket for extra security.
Fastening to a helmet
1. Clip the muvi into the helmet mounting clip.
2. Thread the head/helmet strap through the mounting clip.
3. Thread the elastic through the plastic buckle, place around the helmet
and secure by pulling the strap until it is tight.
Using the arm strap
1. Clip the muvi to the spring mounting clip.
2. Clip the mounting clip to the small flap (near the plastic buckle) and then secure the flap to the Velcro.
3. Thread the end of the arm strap through the plastic buckle, fold it back on itself, tighten and secure to the
Velcro.
Using the magnetic mounting bracket
There are three options for using the bracket:
1. Attach the bracket to any metal object, such as a radiator, as it is magnetic
2. Screw the mounting bracket to a wall, door, shelf etc.
3. Apply one of the mounting brackets Velcro strips to the back of the bracket
and either attach to clothing/material or stick the other strip to any flat surface
and attach the two together.
To attach the muvi to the wall bracket, clip the muvi into the spring mounting
clip, and attach the spring mounting clip to the bracket, lining up the grips of
both pieces to keep the muvi secure.
Using the silicon protective sleeve
Gently insert the muvi into the large hole at the top of the silicon sleeve, ensuring that the muvi enters with
the USB port going in first. You will need to gently stretch the silicon and push the muvi inside the sleeve.
Please note that once the muvi is inside the silicon sleeve that you will not be able to mount it in the spring
mounting clip or the mounting bracket for the helmet/bike. You can thread one of the Velcro strips through
the back of the sleeve and use these to attach the muvi where you want it.


Product specificaties

Merk: Veho
Categorie: Niet gecategoriseerd
Model: VCC-A001-ESP

Heb je hulp nodig?

Als je hulp nodig hebt met Veho VCC-A001-ESP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Veho

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd