Vaxcel T0727 Handleiding

Bekijk gratis de handleiding van Vaxcel T0727 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Vaxcel T0727 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1.Suitable for wet conditions and outdoors.

2.Do NOT touch the LEDs as they get hot while functioning.

3.Do NOT touch or install the fixture while in contact with water.

4.NOT suitable for ground-level installations. Mount between 8 ft. to 12 ft. off the ground.

5.Do NOT leave bare wires exposed outside of their electrical connections.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0727

W

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Large Screw (B)Mounting Arm Crossbar (A)Wire Connector (C)

Important to Know:

1.If you are not familiar with state and local electrical

codes, it is recommended that you consult with a

qualified electrician.

2.This fixture requires a 110-240 VAC, 60 Hz power

source.

3.For general safety and to avoid any possible damage

to the sensor, be sure the power is switched "off"

before adjustment.

4.Do not use this fixture with dimmers.

Maximum Wattage: 42 W

Working Temperature Range: - 40°F ~ 122°F

Features:

1.Energy saving LED fixture.

2.Photocell keeps the light OFF during daylight hours.

3.3 selectable color temperature (3000K/4000K/5000K)

Note: Fixture can be wall mounted or mounting arm mounted.

Wall Mounted

mounting arm mounted

Page 1 / 4

Cover

Wire Compartment Cover Bolt

Wire Connector (C)

Large Mounting Screw (B)

Photocell / CCT Switch

231127

Product specificaties