VAX Pet Carpet 66000 Handleiding

VAX Stofzuiger Pet Carpet 66000

Lees hieronder de 📖 handleiding in het Nederlandse voor VAX Pet Carpet 66000 (6 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Vaxcare:

AUST: 1300 36 4040

NZ: 0800 800 900

Vaxcare:

AUST: 1300 36 4040

NZ: 0800 800 900

www.vax.com.au

Instruction Manual

MODIFIED AUGUST 2008

Please read carefully before using this cleaner.

Always fully extend the mains cable before use.

Retain for future reference.

Multifunction

Instruction Manual

Model No. V2000 - Sukka - VHN - Pet VAX - Family VAX

VAXCARE Service & Help:

AUSTRALIA 1300 36 4040

NEW ZEALAND 0800 800 900

If you have any queries or concerns about using

your Vax, call VAXCARE.

Please make a note of the part number or model

number of the appliance before calling.

(Aust only: Mon-Fri. 10.00am to 6.00pm. EST)

Calls are charged at the local rate.

An answerphone is available out of these hours.

There are over 300 approved Vax Service Agents in

Australia and New Zealand. For the nearest Service

Agent, please refer to your Vax warranty or call

VAXCARE or visit www.vax.com.au

Technical Speciﬁcation

Weight: Net 8.0Kg

Size: Height 54cms x 34cms diameter

Motor: 1200 watts max. / 450 watts min

variable power. 2 stage bypass motor

completely insulated and sealed against

water contamination.

Structure: Moulded high-impact resistant ABS

Dust Bags: Supplied with machine.

Clean Water

Reservoir: 4 litres of clean water.

Recovery

Bucket: 8 litre capacity.

Hose: 1.8m long, crush resistant hose with

360 (degree) swivels at each end.

Subject to technical change without notice.

1. Important Safety Information

THIS ‘EASY GUIDE’ SHOULD BE READ

COMPLETELY AND REFERRED TO AT

ALL TIMES BEFORE USING YOUR VAX.

This ‘easy guide’ should be retained with your

VAX for future reference.

If your VAX is sold or transferred to a new

owner, this guide should be passed on so

that the new owner can become acquainted

with the machine and this information. The

following information is provided in the interest

of safety.

Please read it before using your VAX.

DO’S

• Use only genuine VAX replacement parts.

• Use of non VAX ﬂuids, ﬁlters and accessories

may damage your machine and void your

warranty.

• Ensure the mains cable is fully unwound

and straightened before use.

• If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or a similarly qualiﬁed person in order

to avoid a hazard.

• Ensure the mains cable is kept well away

from the revolving brushes (where ﬁtted)

of your VAX, when it is turned on and

running.

• Keep the mains cable away from heat, oil,

sharp edges and rough surfaces and avoid

damage in any other way.

• Exercise extreme care when cleaning stair

carpets. Ensure that your VAX is in a stable

position at either the top or bottom of the

stairs without over-stretching the hose

or cable. When cleaning the stair treads,

always keep a hand ﬁrmly on your VAX. You

may prefer to remove the castors.

• Follow the instructions in this user guide

when ﬁtting accessories or tools.

• Remove the plug from the wall socket before

carrying out any maintenance speciﬁed in

this guide.

• Change dust bag and ﬁlters at regular

intervals.

• Store your VAX in a dry place.

• Have your VAX serviced by an authorised

VAX Service Agent only using genuine VAX

spare parts.

DONT’S

• This appliance is not intended for use

by young or inﬁrm persons unless they

have been adequately supervised by a

responsible person to ensure that they can

use the appliance safely.

Young children should be supervised

to ensure that they do not play with the

appliance.

• Never drag your VAX by the mains cable.

• Never tug at the mains cable to remove the

plug from the wall socket.

• Never allow the complete coiled mains

cable to drop on the ﬂoor as this may result

in kinks or knots occurring in the cable,

causing premature failure.

• Don’t let anyone touch the rotating brush

bar (where ﬁtted) unless your VAX is

disconnected from the mains.

• Never use your VAX in the presence of

ﬂammable gases.

• Avoid sucking up hot items, hazardous

liquids or any other material which could

damage your VAX.

• Never leave your VAX running unattended.

• Never use your VAX without a dust bag.

• If your VAX fails to operate, never attempt to

repair it yourself as repairs carried out by an

unauthorised or inexperienced person may

cause injury to you or damage to your VAX

and void your warranty.

• Never alter the speciﬁcation or modify your

VAX in any way.

EXTENSION CABLE

If using an extension cable always ensure that

the insulation sheath is in good condition and

is not damaged in any way.

Make sure that the plug and socket are ﬁtted

to the extension cable correctly, if in doubt

have it checked by a qualiﬁed electrician.

Always use the extension cable in accordance

with the manufacturer’s instructions.

IMPORTANT: When carrying out any

maintenance or cleaning operations on this

product, it is essential that the plug is removed

from the wall socket.

In the interests of product improvement,

the Company reserves the right to

introduce modiﬁcations or alterations

without notice.

2. The Sock Filter that

encases the HEPA

ﬁlter, acts as a pre-

ﬁlter and protects it

from the majority of

dust.

To clean the Sock

Filter gently peel it back from the HEPA

(Fig/14.2).

Shake to remove the excess dirt and

hand wash at normal temperature. Do

not machine wash or tumble dry. Do not

replace the sock when it is still damp or

wet.

When replacing the Sock Filter on the

HEPA ensure that the sock is pulled down

completely all round.

The Sock Filter can be cleaned up to

5 times in this way and should then be

replaced.

3. With the sock removed, the HEPA Filter

can be cleaned by gently tapping on a

hard surface. The HEPA Filter should never

be washed or exposed to water.

VAX recommends that the HEPA Filter be

replaced every 12 months to maintain peak

performance.

TIP

The HEPA ﬁlter can also be cleaned by taking

the vacuum outside, removing the HEPA and

vacuuming the HEPA only with the dusting

tool. Ensure all ﬁlters are replaced before

vacuuming your home.

15. Removing debris from the

Mini TurboTool

(Model: Pet VAX only. Optional with other models.)

1. Switch the

vacuum cleaner

off and disconnect

the power plug

from the electrical

outlet.

Rotate or remove

the locking ring

(Fig/15.1).

2. Lift the top cover

off and remove any

debris (Fig/15.2).

3. To re-assemble,

ensure that the

tabs are engaged.

Pivot the lower

housing closed and

rotate or replace

the locking ring

180º (Fig/15.3).

16. Removing hair from

TurboBrush

(Model: Pet VAX & Family VAX or optional

extra with other models).

Over time hair and lint will build up around the

brushbar. This must be removed to maintain

performance and prevent damage to the

tool.

1. Switch the vacuum cleaner off and

disconnect the power plug from the

electrical outlet.

2. Turn the brushbar

over and using a pair

of scissors run the

bottom blade along the

length of the brushbar

cutting the hair as you

go (Fig/16.1).

USE SCISSORS WITH

THE POINT OF THE

BLADE AWAY FROM

YOUR BODY.

3. Once the hair and lint around the brush bar

has been cut, remove the hair out of the

brushes.

17. Storage

IMPORTANT: Always unplug the vacuum

cleaner from the electrical outlet and rewind

the power cord as directed before storing.

NOTE: Always store the vacuum cleaner

base down.

Replacement

3 Filter Pack

Disposable Paper

Bags Pack (5)

Replacement

Cloth Bag

Moulded Cone

Filter Pack (2)

P/N 90630 P/N 90600 P/N 90620 P/N 20310

HEPA Filter &

SMS Filter Cover

P/N 90500

5. The washing tool is ﬂat on the surface

being washed.

6. The power control is correctly

adjusted within the washing

range. Turn higher than

minimum wash setting for

uneven or higher pile if required

(Fig/12.4).

7. There are no kinks in the solution tube.

Remove kinks by rubbing the tube between

ﬁnger & thumb

8. That the recovery bucket is not full, causing

the automatic cut off valve to stop the

suction.

2. Parts Checklist

12. If You Have

Washing Difﬁculties

IF YOU HAVE WASHING DIFFICULTIES,

CHECK...

1. The pump washing button is switched on.

2. The tube valve

is properly

connected

(Fig/12.1).

Before using your VAX, please read ‘Important safety information’ on page 2.

All VAX Multifunctions include:

3. The weight on the end

of the solution tube is

at the bottom of the

water reservoir and

not trapped between

the motor and water

reservoir (Fig/12.2).

4. The rocker

switch is

positioned

t o w a r d s

the back

(Fig/12.3).

13. Looking After Your VAX

Items below are available from your Vax

Retailer or from VAX direct.

REGULARLY (when you buy a new pack

of 5 disposable paper bags or 1 new

cloth bag)…

Replace cone ﬁlter

Available in a pack

of two. Also available

with a bondini ﬁlter and

exhaust ﬁlter in a 3 ﬁlter

pack.

Clean the

Bondini ﬁlter

Available with a cone

ﬁlter and exhaust ﬁlter in

a 3 ﬁlter pack. Wash ﬁlter

in warm water. Squeeze

it dry and replace it.

Your VAX will work more

efﬁciently if the Bondini ﬁlter is replaced with a

new one occasionally.

Clean the

exhaust ﬁlter

Available with a cone

ﬁlter and bondini ﬁlter in

a 3 ﬁlter pack. Wash ﬁlter

in warm water. Squeeze

dry and replace.

Filter housing unit

Motor unit

Water reservoir

Flexible Suction Hose and Hand grip

Stainless Steel Extendible Wand

Dust bags

VAX

Carpet

Cleaning

Fluid

Combination tool

Upholstery

Tool

Dusting

Brush

Crevice tool

Upholstery

washing tool

Recovery bucket

Fibreflow Carpet

Washing Tool

Liquid Delivery Tube

On/off switch

Variable

speed

control

Pump on/off switch

Hyrdo Dry Hard

Floor Wash Head

HEPA

filter

Spill

Pick-up Tool Mini

Turbo Brush

Hard Floor Brush

Other Accessories:

14. Looking After Your HEPA

Filter (Model Family VAX and Sukka only.

Optional extra with other models. Contact

VAXCARE for information)

1. Remove the HEPA

Filter by turning

a n t i c l o c k w i s e

(Fig/14.1).

Product specificaties

Merk:	VAX
Categorie:	Stofzuiger
Model:	Pet Carpet 66000

Heb je hulp nodig?

Als je hulp nodig hebt met VAX Pet Carpet 66000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Stofzuiger VAX

VAX Blade 2 Max Handleiding

29 November 2023

VAX Gator H87-G12 Handleiding

29 November 2023

VAX Blade 4 Handleiding

29 November 2023

VAX Blade 5 CLSV-B5 Handleiding

29 November 2023

VAX Blade 2 Handleiding

29 November 2023

VAX Blade 3 Handleiding

29 November 2023

VAX Blade Handleiding

29 November 2023

VAX Energise Tempo U86-E1-Pe Handleiding

16 November 2023

VAX Energise Tempo U86-E1-Be Handleiding

16 November 2023

VAX Impact Plus U85-I3-Pe Handleiding

1 September 2023

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger

Philips PowerPro Duo FC6172 Handleiding

20 April 2024

Ecovacs DEEBOT YEEDI Y1 PRO PLUS Handleiding

20 April 2024

Clever Clean 970346 Handleiding

18 April 2024

Worx WX031.9 Handleiding

17 April 2024

Airflo AFV30 Handleiding

17 April 2024

Electrolux SuperCyclone ZSC6930 Handleiding

17 April 2024

LG CordZero A900BM Handleiding

17 April 2024

Di4 Aspirovac Compact Handleiding

15 April 2024

Di4 Aspirovac Silence 3.0 Handleiding

15 April 2024

Di4 Aspirovac Cyclone 1.5 Handleiding

15 April 2024