Valera Action Super Plus Handleiding
Pagina's 12 Niet gecategoriseerd
Bekijk de handleiding van Valera Action Super Plus gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Stamp and signature of delear
Stempel und Unterschrift des Händlers
Cachet et signature du commerçant
Timbro e firma del rivenditore
Sello y firma del proveedor
Stempel en handtekening van de handelaar
Carimbo e firma do revendedor
Selgerens stempel og underskrift
Återförsäljarens stämpel och namnteckninge
Myyjän leima ja allekirjoitus
Forhandlerens stempel og underskrift
Eladó pecsétje és aláírása
razítko a podpis prodejce
Подписипечатнапродавача
:
Tampila i semnãtura vãnzãtorului
Pieczec i podpis sprzedawcyù
Satıcının mühür ve imzası
Guarantee card
Garantiekarte
Carte de garantie
Certificato di garanzia
Tarjeta de garantià
Garantiekarte
Certificado de garantia
Garantibevis
Garantibevis
Takuutodistus
Garantibevis
Certificat de garanie
ţ
Záruní list
č
Zárun list
čý
Гаранционнакарта
Garancialevél
Karta Gwarancyijna
Garanti sertificası
Garancijska karta
00060814-01/2021
INSTRUCTIONS FOR USE AND INSTALLATION
BEDIENUNGSANLEITUNG
UND MONTAGEANWEISUNG
INSTRUCTIONS D’UTILISATION
ET DE MONTAGE
ISTRUZIONI PER L’USO
E PER IL MONTAGGIO
INSTRUCCIONES DE USO Y MONTAJE
GEBRUIKAANWIJZINGEN
EN INSTALLATIEAANWIJZINGEN
INSTRUÇÕES DE USO E INSTALAÇÃO
BRUKSANVISNING OG
INSTALLASJONSINSTRUKSJONER
INSTRUKTIONER FÖR INSTALLATION
OCH ANVÄNDNING
KÄYTTÖ- JA ASENNUSOHJEET
BETJENINGS- OG INSTALLATIONSVEJLEDNING
HASZNÁLATI ÉS TELEPÍTÉSI ÚTMUTATÓ
NÁVOD K POUITÍ A INSTALACI
Ž
NÁVOD NA OBSLUHU A INTALÁCIU
Š
ИНСТРУКЦИЯЗАЕКПЛОАТАЦИЯИМОНТАЖ
INSTRUCT
,
IUNI DE FOLOSIRE
SI INSTRUCT
,
IUNI DE INSTALARE
INSTRUKCJA OBSUGI I INSTALACJI
Ł
Οδηγίεςχρήσηςκαιεγκατάστασης
KULLANIM VE MONTAJ TALIMATLARI
ІНСТРУКЦІЯПОЕКСПЛУАТАЦІЇТАМОНТАЖУ
ИНСТРУКЦИИПОЭКСПЛУАТАЦИИИ
УСТАНОВКЕ
安装及使用说明
UPUTE ZA UPORABU I MONTAU
Ž
Wall holder
Wandhalter
Support mural
Supporto a muro
Soporte de pared
Muursteupt
Suporte de parede
Veggholder
Vägghållare
Seinäteline
Vægbeslag
Fali tartó
Nástnn drák
ěýž
Driak na stenu
ž
Държачзастена
Suport de perete
Uchwyt nacienny
ś
Βάσηςτοίχου
Duvara monte
Настіннийутримувач
Настенныйдержатель
壁挂底座
Zidni nosa
č
Hairdryer
Haartrockner
Sèche-cheveux
Asciugacapelli
Secador
Haardroger
Secador de cabelo
Hårtørker
Hårtork
Hiustenkuivaaja
Hårtørrer
Hajszárító
Vysoue vlas
ščů
Sui vlasov
šč
Usctor de pr
ăă
Сешоарзакоса
Suszarka do wosów
ł
Σεσουάρ
Saç kurutma makinasi
Фен
Фен
吹风机
Suilo za kosu
š
ΕΎϤϴϠόΗϝΎϤόΘγϻϭ
ΐϴϛήΘϟ
ΔϴτΎΣ
ΔϣΎϋΩ
ENHairdryer -
Wall holder
6
DEHaartrockner -
Wandhalter
9
FRSèche-cheveux -
Support mural
12
ITAsciugacapelli -
Supporto a muro
15
ESSecador -
Soporte de pared
18
NLHaardroger -
Muursteun
21
PTSecador de cabelo - Suporte de parede24
NOHårtørker - Veggholder27
SVHårtork - Vägghållare30
FIHiustenkuivaaja - Seinäteline33
DAHårtørrer - Vægbeslag36
HUHajszárító - Fali tartó39
CSVysoue vlas - Nástnn drák
ščůěýž
42
SKSui vlasov - Driak na stenu
ščž
45
BG -
СешоарзакосаДържачзастена
48
RO
Usctor de pr -
ăă
Suport de perete
51
PLSuszarka do wosów - Uchwyt nacienny
łś
54
EL -57
TR
Saç kurutma makinasi - Duvara monte
60
UK
Фен
-
63
RU
Фен
-
Настенныйдержатель
66
ZH
吹风机
吹风机
吹风机
吹风机吹风机
-
-
-
- -
壁挂底座
壁挂底座
壁挂底座
壁挂底座壁挂底座
69
SA -72
HRSuilo za kosu - Zidni nosa
šč
75
ήόθϟ
ϒϔΠϣ
Made by Ligo Electric SA - Via Ponte Laveggio, 9
6853 Ligornetto / Mendrisio - Switzerland
Valera is a registered trademark of Ligo Electric S.A. - Switzerland

Name and full address of purchaser
Name und vollständige Anschrift des Käufers
Nom et adresse completè de l’acheteur
Nome e indirizzo completo dell’acquirente
Nombre y dirección completa del comprador
Naam en adres van de consument
Nome e endereço do cliente
Kjøperens fullstendige navn og adresse
Köparens namn och fullständig adress
Ostajan nimi ja täydellinen osoite
Køberens fulde navn og adresse
Vevo˝ neve éstelies cime
Jméno a adresa záhaznika
Meno a celá adresa kupujúceho/zákazníka
Имефамилияипъленадреснакупувача
,
Numele i adresa completa˘ a compãrãtorului
Nazwisko oraz pelny adres kupujacego
Alıcının tam ismi ve adresi
Ime i adresa kupca
English
Mod. Nr.
Date of purchase
Kaufdatum
Date d’achat
Data d’acquisto
Fecha de adquisición
Datum aankoop
Data de compra
Innkjøpsdato
Inköpsdatum
Ostopäivämäärä
Købsdato
Eladás dátuma
Datum prodeje
Data cumpãrãrii
Датаназакупуване
Dátum nákupu
Data zakupu
Satın alma tarihi
Datum kupnje
Ligo Electric SA - 6853 Ligornetto / Mendrisio - Switzerland
158 mm
(Mod. 533..)
148 mm
(Mod. 554..)
245 mm
(Mod. 533.., 542..)
225 mm
(Mod. 554..)
183 mm
(Mod. 533.., 542..)
160 mm
(Mod. 554..)
ASSEMBLY AND OPERATING INSTRUCTIONS
Original instructions
Read these instructions thoroughly. Available also on www.valera.com
CAUTION
•For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30mA is advisable
in the electrical circuit supplying the bathroom. Ask your installer for advice.
•Make sure the electrical system is fitted with a device which guarantees
omnipolar disconnection from the electricity mains under category III
overvoltage conditions.
•Make sure the unit is perfectly dry before using it.
•WARNING: Do not use this appliance near bathtubs, showers, basins
or other vessels containing water.
•This hairdryer must be fixed so that a person taking a bath or shower
cannot reach the handle, considering the cord at maximum extension.
•This appliance can be used by children from 8 years of age and over, and by
persons with limited physical, sensory or mental abilities or who lack the
relevant experience and knowledge, if they are suitably supervised or have
been educated to use the appliance safely and made aware of the associated
risks.
•Do not allow children to play with the appliance.
•Children must not perform cleaning and maintenance procedures unless
supervised.
•Do not use your unit if it is not working properly. Do not try to repair this
electrical unit yourself, rather contact an authorized technician. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid a hazard.
•Plug the hairdryer into an alternating current outlet only, and make sure
that the voltage of your electricity supply is the same as that indicated on
the rating plate of the appliance.
•Do not immerse in water or other liquids.
•Never put the appliance in a place where it could fall into water or in other
liquids.
•Do not try to salvage an electrical appliance which has fallen into water.
•Turn the unit off when you put it down.
•Unplug the appliance when not in use, but never do it by pulling the cord.
6

7
INSTALLATION INSTRUCTIONS
Wall holder for hairdryer
Type 036 - 038A - 038B
Type 036
Front housing model.
Type 038A
Vertical housing model.
Type 038B
As the 038A but with no switch.
Installation of wall holder
This wall holder must only be installed by a qualified electrician
in conformity to applicable safety standards.
The wall holder may be installed in one of two ways:
A = for fixed connection lead
B = for mobile connection lead
Attention: before installing the wall holder always switch off
the general switch of your mains electricity.
For each pole a switch with a minimum break distance between
contacts of 3 mm must be fitted up-line of the appliance.
Each time the appliance is opened, the switch must be used to
disconnect the appliance.
The connection wiring must be type H05VV-F 2x1,5 mm
2
.
Method A
IMPORTANT: Refer to the figures for the model you have
purchased.
1.Unscrew the screw (1) (fig. 1) and remove the cover from the
wall unit.
2.Break the plastic membrane (3) at the back of the wall unit
(fig. 3A).
3.Route the main power cable from the wall (4) through the
hole left by the plastic membrane (3) (fig. 3A).
4.Fix the back of the wall unit to the wall using the fixing screws
and wall plugs provided (fig. 2).
5.Remove the terminal strip (5). The input power cable (4) and
the output power cable (9) of hairdryer with max input current
of 10A,if not already connected, must be connected to the
terminal strip(5).
In mod. 036 the Neutral output cable(9) must be connected
to terminal strip(5) and the Line output cable (9) to terminal
strip (11).
6.Reposition the terminal strip. Tighten the cable clamp
(6 and 10) with its own screws. (fig. 3A). IMPORTANT: This
appliance is double insulated and has no ground (earth)
connection.
7.Fit the cover back on the wall unit with (1) (fig. 1).
8.Switch the power on at the mains switch. The hair dryer is
now ready to use.
Method B
IMPORTANT: Refer to the figures for the model you have
purchased.
1.Unscrew the screw (1) (fig. 1) and remove the cover from the
wall unit.
2.Break the plastic membrane (7) (fig. 3B).
3.Fix the back of the wall unit to the wall using the fixing screws
and wall plugs provided (fig. 2).
4.Route the input power cable (8) and the output power (9)
into the holes (fig. 3B).
5.Remove the terminal strip (5). The input power cable (8) and
the output power cable (9) of hairdryer with max input current
of 10A,if not already connected, must be connected to the
terminal strip(5).
In mod. 036 the Neutral output cable(9) must be connected
to terminal strip (5) and the Line output cable (9) to terminal
strip (11).
Reposition the terminal strip. Tighten the cable clamp (6 and
10) with its own screws. (fig. 3B). IMPORTANT: This appliance
is double insulated and has no ground (earth) connection.
6.Fit the cover back on the wall unit with (1) (fig. 1).
7.Switch the power on at the mains switch. The hair dryer is
now ready to use.
INSTRUCTIONS FOR USE
Hairdryer with wall holder
Control Switches
Control switch on wall holder
(only for models equipped with a switch) rif. 2 fig. 1:
0-1 = Off/On
Hairdryer
Type 533.03 - 533.05 - 533.03/I - 533.05/I
542.05 - 542.06 - 542.14 - 561.22
Pushbutton:
ON=On/Off
(pressure must be maintained to operate the hairdryer)
Slide Switch
Cool=(low power)
1=(medium power)
2=(maximum power)
•Remember to check regularly that the air inlet and outlet grills are clean.
•Allow your appliance to cool before storing away and do not wrap the supply
cord around the hairdryer in storage.
•The A-weighted sound pressure level of the hairdryers for commercial use is
below 70 dB(A).
Product specificaties
| Merk: | Valera |
| Categorie: | Niet gecategoriseerd |
| Model: | Action Super Plus |
| Kleur van het product: | Wit |
| Aantal snelheden: | 2 |
| Vermogen: | 1600 W |
| Cool shot-functie: | Ja |
| Ionic functie: | Nee |
| Concentrator nozzle: | Ja |
| Diffuser kop: | Nee |
| Ophangtype: | Ophangring |
| Aantal temperatuurstanden: | 3 |
| Ophangbaar: | Ja |
| Twee warmte-instellingen: | Ja |
| Dubbel voltage: | Ja |
| AC-ingangsspanning: | 220-240 V |
Heb je hulp nodig?
Als je hulp nodig hebt met Valera Action Super Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden