US Blaster USB 7393 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor US Blaster USB 7393 (34 pagina's) in de categorie DJ Party Music. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34
©U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
OWNERS MANUAL
MICROPHONE SYSTEMS
USB 7392 - 7393
©U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
GENERAL SAFETY INSTRUCTIONS
- Always read the user guide before using the equipment.
- Keep the user guide in a place where everyone can read it.
- Use the equipment indoors and not in humid environments.
- Never remove or insert a plug from or into a wall socket with wet hands.
- If the plug and/or cable and/or cable input of the equipment is damaged it must be repaired by
aprofessional.
- Always take the plug out of the wall socket in the event of a thunderstorm, and also when the
equipment is not being used for a while.
-Never remove the plug from the power socket by pulling on its cable.
- Install the equipment in such a way that sufficient cooling is possible.
- Never use the appliance in the vicinity of heat sources and/or in direct sunlight.
-Make sure that no small objects or liquids can get in to the appliance.
-Only clean the appliance with a slightly moist dust-free cloth. Do not use cleaning products or
solutions!
-The appliance contains no components, other than those mentioned in the user guide that can
be repaired or replaced by the user.
- If the appliance is defective, it must be repaired by a US Blaster qualified repairs company.
- Keep the equipment out of the reach of children.
Keep the packaging safe so that, if the equipment is defective, you can
send it back in its original packaging and so avoid any damage.
©US Blaster Europe BV
Do not carry out any repairs on the equipment yourself; doing so will invalidate the guarantee.
The equipment may also not be modified; doing so will also invalidate the guarantee.
The guarantee is also invalidated if accidents and damage of any form are caused as a result
of improper use and/or not heeding the warnings in general as laid out in this user guide.
US Blaster Europe accepts no responsibility for any personal accidents as a consequence of not
following the safety instructions and warnings. This is also the case for consequential loss in
any form.
©U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
GENERAL SPECIFICATIONS
-Two-channel system
-Two handheld transmitters
-Working frequency range: UHF 520-820MHz
-PLL system
-Diversity (selective reception)
-2x16 selectable frequencies
-LCD display (liquid crystal display)
TRANSMITTER DESCRIPTION
1. Sound Settings
These settings enable the user to set the volume of audio signals at the signal inputs for each channel.
Note: If you set the volume too high, the sound may be distorted.
Note: If volume setting is too high when the system operates near speakers, it may result in Larsen effect
in the speakers.
2. LED Display
Displays for each channel indicate all indications necessary to a proper function of the HF system:
-frequency being used
-number of the channel corresponding to the frequency being used
-RF reception level
-AF audio signal level
- Receiving aerial indicator: 1 or Il
-Sound attenuation (cut-off) indicator: Mute
3. Frequency Confirmation Button
This button allows you to confirm the frequency selected. In addition, it allows you to confirm receiver
settings.
The button is also used to lock a working frequency.
©US Blaster Europe BV


Product specificaties

Merk: US Blaster
Categorie: DJ Party Music
Model: USB 7393

Heb je hulp nodig?

Als je hulp nodig hebt met US Blaster USB 7393 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden