UPM TSH723 Handleiding

UPM Thermostaat TSH723

Lees hieronder de đź“– handleiding in het Nederlandse voor UPM TSH723 (6 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
INDOOR CLOCK WITH
TEMPERATURE & HUMIDITY DISPLAY
TSH723
OWNER’S
MANUAL
1
LIMITED ONE-YEAR WARRANTY
4
2
6
3
5
SET CLOCK (Press buttons in the following order:) SET DATE (Press:)
SET ALARM (Press:)
SET ÂşC or ÂşF
SEE MIN. / MAX. DAILY TEMPERATURE
SPECIFICATIONS
1. (press until month / day / weekday appears)MODE
2. SET
3. (to select month)UP or DOWN
4. SET
5. (to select date)UP or DOWN
6. SET
7. (to select weekday)UP or DOWN
8. (to restore normal clock mode)SET / MODE
1. (press until clock display appears)MODE
2. SET
3. (to select hour)UP or DOWN
4. SET
5. (to select minute)UP or DOWN
6. (to restore normal clock mode)SET
1. (press until the alarm clock “bell” appears)MODE
2. SET
3. (to select alarm hour)UP or DOWN
4. SET
5. (to select alarm minute)UP or DOWN
6. SET
7. (ON will display to indicate alarm on / press again to UP
turn alarm off)
1. (press in normal clock mode / ÂşC or ÂşF will display)DOWN
1. (press in normal clock mode / Min./Max. temperature UP
will display)
Features:
• Easy-to-read LCD display
• Alarm clock and calendar
• Indoor temperature and humidity display
• Mounts on desk, wall or with magnet
2 x AAA batteries required
Temperature range: -20ÂşC to +50ÂşC / -4ÂşF to +122ÂşF
Humidity range: 15% to 95%
For indoor use only
For customer service go to: www.upm-marketing.com
Or call: 1-888-GO-TO-UPM (1-888-468-6876)
Low battery symbol
TEMPERATURE
HUMIDITY
TIME OR DATE
UP
MODE
DOWN
SET (on back of unit)
SET 12 or 24 HOUR CLOCK (Press:)
1. (press until alarm clock “bell” appears)MODE
2. (press to toggle between 12 and 24 hours)DOWN
3. Select a time after 12 noon,
- PM = 12 hour mode,
- a number from 13 to 23 = 24 hour mode
4. (to restore normal clock mode - setting will remain)MODE
UPM warrants this product, excluding batteries, to be free from defects
in the materials or workmanship, under normal use and service, for a
period of one (1) year from the date of purchase by the consumer.
If, at any time during the warranty period, the product is defective or
malfunctions, UPM shall replace it (at UPM's discretion) within a
reasonable period of time.
If the product is defective, return it, with a dated proof of purchase, to
the retailer from which you purchased it.
This warranty shall not apply if it is shown by UPM that the defect or
malfunction was caused by damage which occurred while the product
was in the possession of the consumer.
HORLOGE D’INTÉRIEUR AVEC
AFFICHAGE DE LA TEMPÉRATURE
ET DU TAUX D’HUMIDITÉ
TSH723
GUIDE D’
UTILISATION
GARANTIE LIMITÉE D'UN AN
RÉGLAGE DE L’HORLOGE (Appuyer sur:) RÉGLAGE DE LA DATE (Appuyer sur :)
RÉGLAGE DE LA SONNERIE (Appuyer sur:)
ÂşC ou ÂşF (Appuyer sur:)
VOIR LA TEMPÉRATURE MINIMALE ET MAXIMALE
SPÉCIFICATIONS
1. (jusqu’à ce que mois / date / jour de la semaine MODE
apparaisse)
2. SET
3. (pour choisir le mois)UP ou DOWN
4. SET
5. (pour choisir la date)UP ou DOWN
6. SET
7. (pour choisir le jour de la semaine)UP ou DOWN
8. (pour revenir au mode horloge régulier)SET / MODE
1. (jusqu'à ce que l’horloge apparaisse)MODE
2. SET
3. (pour régler l’heure)UP ou DOWN
4. SET
5. (pour régler les minutes)UP ou DOWN
6. (pour revenir au mode horloge régulier)SET
1. (jusqu’à ce que la cloche apparaisse)MODE
2. SET
3. (pour choisir l’heure de la sonnerie)UP ou DOWN
4. SET
5. (pour choisir les minutes de la sonnerie)UP or DOWN
6. SET
7. (ON apparaîtra pour indiquer que la sonnerie est mise; UP
appuyer Ă  nouveau pour enlever la sonnerie)
1. (en mode horloge régulier et ºC ou ºF sera affiché)DOWN
1. (en mode horloge régulier et les températures minimale UP
et maximale seront affichées, pour un jour seulement)
Caractéristiques:
• Affichage LCD facile à lire
• Réveil et calendrier
• Température intérieure et taux d’humidité
• Peut être placée sur un bureau our montée au mur à l’aide
de vis ou d’aimants
2 x piles AAA requises
Plage de temperature: -20ÂşC Ă  +55ÂşC / -4ÂşF Ă  +131ÂşF
Plage du taux d’humidité: 15% to 95%
Indicateur de faiblesse des piles
Pour obtenir du soutien technique, visitez le site Web:
www.upm-marketing.com
ou composez le 1-888-GO-TO-UPM (1-888-468-6876)
Pour usage à l’intérieur seulement
TEMPÉRATURE
HUMIDITÉ
HEURE OU
DATE
UP
(HAUT)
MODE
DOWN
(BAS)
SET - Bouton de réglage
(au dos de l’unité)
CHOISIR UNE HORLOGE DE OU DE 12 24 HEURES (Appuyer sur :)
1. (jusqu’à ce que la cloche apparaissez)MODE
2. (pour passer de 12 heures Ă  24 heures)DOWN
3. Choisir une heure quelconque après 12 heures,
- PM = l’horloge de 12 heures (ou)
- un nombre entre 13 et 23 = l’horloge de 24 heures
4. (pour revenir au mode horloge régulier; les réglages MODE
demeurent inchangés)
FRENCH
UPM garantit que ce produit, Ă  l'exception des piles, est exempt de tout
défaut matériel et de fabrication et qu'il est couvert par une garantie
limitée, dans des conditions normales d'usage et de service, pendant
une période de un (1) ans qui commence depuis la date de l'achat par le
consommateur. Si à n'importe quel moment durant la période de
garantie, le produit est défectueux ou ne fonctionne pas correctement,
UPM le remplacera (à la discrétion d'UPM) et ce dans une période
raisonnable de temps.
Si le produit est défectueux retourner le, avec la preuve datée de l'achat,
au revendeur où vous l'avez acheté.
Cette garantie ne appliquera pas s'il est prouvé par UPM que le défaut
ou le mauvais fonctionnement aurait été causé par un dommage qui
s'est produit pendant que le produit Ă©tait en possession du
consommateur.
1
4
2
6
3
5


Product specificaties

Merk: UPM
Categorie: Thermostaat
Model: TSH723

Heb je hulp nodig?

Als je hulp nodig hebt met UPM TSH723 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat UPM

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat