Union Special 35800 Handleiding

Union Special Naaimachine 35800

Lees hieronder de 📖 handleiding in het Nederlandse voor Union Special 35800 (61 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/61

40052737

No.E376-00

ENGINEER’S MANUAL

Feed-off-the arm, 3-Needle, Double Chainstitch Machine

35800 Series

Introduction

This Engineer’s Manual is written for the technical personnel who are responsible for the service and mainte-

nance of the machine.

The maintenance services to be done on this sewing machine should be based on this manual.

This manual gives the "Standard Adjustment" on the former section under which the most basic adjustment

value is described and on the latter section the "Results of Improper Adjustment" under which stitching errors

and troubles arising from mechanical failures and "How To Adjust" are described.

CONTENTS

1. Specications ........................................................................................................ 1

(1) Roller mechanism/clutch type ............................................................................................... 1

(2) Roller mechanism/belt type ................................................................................................... 2

2. Model list ................................................................................................................ 3

(1) Model list using the roller mechanism of the clutch type................................................... 3

(2) Model list using the roller mechanism of the belt type ....................................................... 3

3. Description of US model code .................................................................... 5

4. Description of model code .......................................................................... 6

5. Names of machine head .............................................................................. 7

6. How to pass the threads.............................................................................. 8

(1) Dierential feed....................................................................................................................... 8

(2) 1 piece feed ............................................................................................................................. 9

7. Standard adjustment ............................................................................................10

(1) How to remove the gauge components and upper feed roller ......................................... 10

(dierential feed mechanism and 1 piece feed mechanism)

(2) Timing between the looper and needle bar ........................................................................ 12

(3) Adjustment of the needle entry positions in the right-left and front-rear directions ..... 14

(4) Looper adjustment ............................................................................................................... 16

1) Looper return .....................................................................................................................................16

2) Adjustment of the clearance between the looper and needle ............................................................16

(5) Adjustment of the needle bar height .................................................................................. 18

(6) Adjustment of the looper motion paths.............................................................................. 20

(7) Adjustment of rear needle guide ......................................................................................... 22

1) Longitudinal adjustment of the rear needle guide ..............................................................................22

2) Height adjustment of rear needle guide .............................................................................................22

(8) Adjustment of feed dog height and longitudinal movement

(dierential feed dog mechanism) ...................................................................................... 24

1) Height of main feed dog.....................................................................................................................24

2) Height of differential feed dog ............................................................................................................24

3) Adjustment of longitudinal movement of main feed dog ....................................................................24

4) Adjsutment of vertical height of main feed dog and differential feed dog ..........................................24

5) Gradient of main feed dog and differential feed dog......................................................................... 24

(9) Adjustment of feed dog height and longitudinal movement

(1 piece feed dog mechanism) ............................................................................................ 26

1) Height of main feed dog.....................................................................................................................26

2) Adjustment of longitudinal movement of main feed dog ....................................................................26

(10) Adjustment of feed mechanisms ........................................................................................ 28

1) Adjustment of stitch length.................................................................................................................28

2) Adjustment of differential feed amount ..............................................................................................28

(11) Presser adjustment .............................................................................................................. 30

1) Adjustment of amount of rise of presser ............................................................................................30

2) Adjustment of presser bar pressure................................................................................................... 30

(12) Adjustment of upper feed roller .......................................................................................... 32

(13) Replacement of upper feed roller........................................................................................ 34

(14) Adjustment of drawing amount of upper feed roller ......................................................... 36

Product specificaties

Merk:	Union Special
Categorie:	Naaimachine
Model:	35800

Heb je hulp nodig?

Als je hulp nodig hebt met Union Special 35800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Naaimachine Union Special

Union Special 39500JJ Handleiding

13 Oktober 2023

Union Special 52800S Handleiding

13 Oktober 2023

Union Special 51200BT Handleiding

13 Oktober 2023

Union Special 52800BR Handleiding

13 Oktober 2023

Union Special 39500SW Handleiding

13 Oktober 2023

Union Special 81500E Handleiding

13 Oktober 2023

Union Special 39500FB Handleiding

13 Oktober 2023

Union Special SP172S800MACC Handleiding

13 Oktober 2023

Union Special 39500FY Handleiding

13 Oktober 2023

Union Special 39500PA Handleiding

13 Oktober 2023

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine

Husqvarna-Viking Hiclass E20 Handleiding

25 April 2024

Husqvarna-Viking Eden Rose 250C Handleiding

25 April 2024

Singer SO235 Handleiding

25 April 2024

Husqvarna-Viking Hiclass E10 Handleiding

25 April 2024

Husqvarna-Viking Eden Rose 250M Handleiding

25 April 2024

Husqvarna-Viking Huskylock 90 Handleiding

25 April 2024

Pfaff Hobbylock 4763 Handleiding

25 April 2024

Husqvarna-Viking Metal Hoop 180-130mm Handleiding

25 April 2024

Husqvarna-Viking Huskylock s15 Handleiding

25 April 2024

Husqvarna-Viking Amber Air S600 Handleiding

25 April 2024