Uniden DXAI 8580 Handleiding
Uniden
Draadloze telefoons
DXAI 8580
Lees hieronder de 📖 handleiding in het Nederlandse voor Uniden DXAI 8580 (16 pagina's) in de categorie Draadloze telefoons. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product.
If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
Our customer care specialists are here to help you! Visit our website at www.
uniden.com or call our Customer Hotline at during 1-800-297-1023
regular business hours.*
Need a Part?
To order headsets, additional handsets, replacement batteries or other
accessories, visit our website at or call www.uniden.com 1-800-554-3988
during regular business hours.*
Help for our Special
Needs Customers
Uniden provides a customer service hotline for accessibility questions. If
you have disability and need customer service assistance or if you have any
questions about how Uniden's products can accommodate persons with
disabilities, please call the accessibility voice/TTY line:
1-800-874-9314 (voice or TTY).
Accessibility information can be found on our website, , www.uniden.com
under the "Accessibility" link. If your call is received outside of our business
hours, leave us a message and we will call you back.
* Central Standard Time. Detailed customer service hours are available at www.uniden.com.
©2007 Uniden America Corporation, Fort Worth, Texas.
Contains additional foreign articles.
Printed in China UCZZ01067BZ(0)
UNIDEN
CORDLESS
TELEPHONES
DXAI8580 Series
C U T
REMOTE OPERATION CARD
Remote access away from home
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press and enter your PIN code.[0]
The answering system announces the
number of messages stored in memory
and the voice prompts. The phone
stands by for you to enter a command.
3. To quit, hang up the phone.
Turn on the answering system
remotely
1. Call your phone and let it ring
10 times until it answers.
2. Press and enter your PIN code.[0]
3. Press then to stop the [0] [5]
announcement.
4. Press then to turn the [0] [6]
answering system on.
Remote Operation Card
1) Installing the Phone
1-1. Choosing the Best Location
To get the best performance out of your new phone, put it in the best location:
Near an AC outlet
and a telephone
wall jack.
• Microwave ovens
• Refrigerators
• Fluorescent
lighting
• Dust
• Excessive
moisture
• Other cordless
telephones
In a
centrally-located
open area.
PLACE YOUR BASE
• TVs
• Other electronics
• Direct sunlight
• Extreme temperatures
• Personal computers
• Wireless LAN
equipment
• Dust
• Excessive
moisture
• Areas with
a lot of
background
noise
• Shock
• Vibration
• Shock
• Vibration
TRY TO AVOID
Notes: For maximum range
Keep both the base and handset antennas free of obstruction.
When the handset is not in use, place the handset in an upright position.
Metal and reinforced concrete may aect cordless telephone performance.
•
•
•
1-2. Plug in the Battery
Use only the Uniden BT-905 rechargeable battery pack supplied with your phone.
1Locate the battery packs, battery
covers and the handsets. 2Line up the red and black wires
on the battery pack connector
with the sticker in the handset's
battery compartment.
3Place the cover over the
battery compartment and
slide it up into place.
Push the battery connector in firmly.
(You should hear it click into place.)
Red
Black
1Locate the battery packs, battery
covers and the handsets. 2Line up the red and black wires
on the battery pack connector
with the sticker in the handset's
battery compartment.
3Place the cover over the
battery compartment and
slide it up into place.
Push the battery connector in firmly.
(You should hear it click into place.)
Red
Black
1-3. Plug in the Base and Charging Cradle
You can put the charging cradles for additional handsets anywhere they can get power. They do not have to
connect to a phone line.
Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or
worn out, it can create a re or electrical hazard.
4Put the base's AC adapter cord through the hole in the stand
and connect the AC adapter to the jack.DC IN 9V
6
5
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
7Connect the charging cradle's AC adapter
to a standard 120V AC wall outlet.
Route the cord
through the molded
wiring channel.
Route the cord
To AC outlet
AC adapter
(supplied)
To AC outlet
AC adapter
(supplied)
To DC IN 9V
4Put the base's AC adapter cord through the hole in the stand
and connect the AC adapter to the jack.DC IN 9V
6
5
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
7Connect the charging cradle's AC adapter
to a standard 120V AC wall outlet.
Route the cord
through the molded
wiring channel.
Route the cord
To AC outlet
AC adapter
(supplied)
To AC outlet
AC adapter
(supplied)
To DC IN 9V
Note: For optimum battery life, charge all of your handsets completely before you connect the
telephone cord. The rst time you charge a new battery, allow 15 to 20 hours.
1-4. Connect the Telephone Cord
Note: If the telephone cord does not t into your telephone wall jack, contact your local phone provider for
assistance.
If you receive high-speed internet service through your
telephone line (referred to as DSL), you should install
a DSL lter between the telephone base and the wall
jack. Standard telephones often can’t operate correctly
without a DSL lter.
Testing the connection
13 Make a quick test call, and then press [END] to hang up.
What if the call doesn't go through?
Check to see if your telephone provider uses pulse dialing.
(See section 3-1 on System Options.)
What if there is a lot of static?
Check the sources of interference described in section
1-1 on Choosing the best location: is the base near
any of those?
1-5. Registering Accessory Handsets
1-6. Things to Remember
When you charge the handsets, the Caller ID summary screen and the
name of the handset appear in the display.
Lots of people put HANDSET #1 in the base, but it doesn’t matter which
handset you put in the base and which one you put in the charging
cradle.
Now your phone is ready to use!
•
•
8Place one handset in the base and the other in the charging cradle.
What if the charge LED doesn't
light up?
• Check AC adapter connection.
• Make sure you are not using
an outlet that's controlled by
a wall switch.
Make sure that the
charge/in use and
LEDs illuminate.
8Place one handset in the base and the other in the charging cradle.
What if the charge LED doesn't
light up?
• Check AC adapter connection.
• Make sure you are not using
an outlet that's controlled by
a wall switch.
Make sure that the
charge/in use and
LEDs illuminate.
9Connect the telephone cord to the jack on the rear of the base.TEL LINE
11
10
Connect the telephone cord
to a telephone wall jack.
Route the cord through
the hole in the stand
and into the molded
wiring channel.
To telephone
wall jack
Telephone cord (supplied)
To TEL LINE
9Connect the telephone cord to the jack on the rear of the base.TEL LINE
11
10
Connect the telephone cord
to a telephone wall jack.
Route the cord through
the hole in the stand
and into the molded
wiring channel.
To telephone
wall jack
Telephone cord (supplied)
To TEL LINE
Telephone
wall jack
Telephone cord
DSL filter
Telephone
wall jack
Telephone cord
DSL filter
12 Pick up the handset from the base and press [TALK/flash].
You should hear a dial tone, and the display should show TALK.
What if I can't hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn't show TALK?
Put the handset back in the base for at least five seconds.
Make sure the LED flashes.charge/in use
Talk 0:01
12 Pick up the handset from the base and press [TALK/flash].
You should hear a dial tone, and the display should show TALK.
What if I can't hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn't show TALK?
Put the handset back in the base for at least five seconds.
Make sure the LED flashes.charge/in use
Talk 0:01
14
15
One by one, put each additional handset in the base.
The LED should flash as the base recognizes the handset.charge/in use
Wait at least five seconds, then pick up the handset and press
[TALK/flash]. Make sure you can get a dial tone on each handset.
What if the LEDcharge/in use
doesn't flash?
Pick the handset up and put it back
in the base.
14
15
One by one, put each additional handset in the base.
The LED should flash as the base recognizes the handset.charge/in use
Wait at least five seconds, then pick up the handset and press
[TALK/flash]. Make sure you can get a dial tone on each handset.
What if the LEDcharge/in use
doesn't flash?
Pick the handset up and put it back
in the base.
HS1
New :01
Total:17
HS1
New :01
Total:17
Product specificaties
| Merk: | Uniden |
| Categorie: | Draadloze telefoons |
| Model: | DXAI 8580 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uniden DXAI 8580 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Draadloze telefoons Uniden
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Draadloze telefoons
- Draadloze telefoons Philips
- Draadloze telefoons Panasonic
- Draadloze telefoons Gigaset
- Draadloze telefoons Medion
- Draadloze telefoons Topcom
- Draadloze telefoons Alcatel
- Draadloze telefoons Audioline
- Draadloze telefoons Belgacom
- Draadloze telefoons KPN
- Draadloze telefoons MT Logic
- Draadloze telefoons Profoon
- Draadloze telefoons Proximus
- Draadloze telefoons Sagem
- Draadloze telefoons Swissvoice
- Draadloze telefoons Switel
- Draadloze telefoons Telefunken
- Draadloze telefoons Bang And Olufsen
- Draadloze telefoons Steren
Nieuwste handleidingen voor Draadloze telefoons
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022