Uniden BP-100 Handleiding
Uniden
Niet gecategoriseerd
BP-100
Bekijk gratis de handleiding van Uniden BP-100 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 278 mensen en kreeg gemiddeld 4.4 sterren uit 139.5 reviews. Heb je een vraag over Uniden BP-100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

1
BP-100
Accessory Battery Pack
For more exciting new products please visit our website:
Australia: w.uniden.com.auww
New Zealand: w.uniden.co.nzww

2
◆ If any items are missing or damaged, contact your place of purchase
immediately. Never use damaged products!
◆ Need help? Get answers at our website:
www.uniden.com.au for Australian model
www.uniden.co.nz for New Zealand model.
◆ Do not expose the device to flames or dispose of it in a fire: the battery
may explode.
◆ Do not disassemble, modify, or attempt to repair any component of this
product.
◆ This unit is waterproof. expose this unit to rain or NOT DO NOT
moisture.
◆ Use only the batteries indicated in this manual.
What’s in the Box?
◆ 2 Rechargeable Battery (BT-694)
◆ Battery Box
Install Battery
1. Remove the battery from any protective packaging and discard the
packaging accordingly. To remove the cover of the battery box, press in
on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside the battery box; the
connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to
make sure the battery is securely connected.
4. Replace the cover and slide it into place.
IMPORTANT SAFETY INSTRUCTIONS
GETTING STARTED
#
You can install up to 3 battery packs.

3
Connect AC Adaptor to base
1. Use the AC Adaptor of a compatible base to connect the power jack on
the Battery Box to a regular indoor power outlet.
2. Use the power cable to connect to the DC IN port of a compatible base.
Test the Connection
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
Power LED
LED What it indicates
OFF No AC adaptor, No charged battery.
ON AC adaptor powered, one or more battery is charging, or
powered.
With AC Adaptor
Without AC Adaptor (During a Black Out)
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
#Battery box will charge under this condition.
#
Charge completely (about 24 hours) before using.
The BP-100 battery box is connected in-line between the base and AC
adaptor of a compatible telephone.
Product specificaties
Merk: | Uniden |
Categorie: | Niet gecategoriseerd |
Model: | BP-100 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uniden BP-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Uniden
22 November 2024
4 November 2024
20 Maart 2024
20 Maart 2024
23 November 2023
22 November 2023
22 November 2023
22 November 2023
22 November 2023
26 Juli 2023
Handleiding Niet gecategoriseerd
- Linhof
- Piko
- Waterstone
- Comtek
- ClimeMET
- Peavey
- Racktime
- Motu
- Ferrofish
- Wonky Monkey
- YISHU
- SE Electronics
- Socket Mobile
- Magnavox
- Klarstein
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025