Uni-T UT382 Handleiding

Uni-T Lichtmeter UT382

Lees hieronder de 📖 handleiding in het Nederlandse voor Uni-T UT382 (2 pagina's) in de categorie Lichtmeter. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

I Overview

UT380 series luminometer has two models: UT381 and UT382. UT380 series

luminometer is a kind of digital meter applying high-precision digital visible light

sensor and 8-bit microprocessor processing data.

Illuminance: Illuminance means the luminous received on each unit area ﬂux

of illuminated object, with adopted unit of foot candle (12 inches make 1foot)

in Britain and USA and meter candle in Europe. 1 foot candle means the

illuminance received on the surface from the direct 1 candle light source with 1

foot away from the illuminated surface, abbreviated as FC. In the same way, 1

meter candle means the illuminance received on the surface from the direct 1

candle light source with 1 meter away from the illuminated surface, abbreviated

as . UT380 series can test illuminance within 0 20, , and UT382 can Lux ～000Lux

be connected with PC to realize real-time data storage and analysis, and the data

recorded in luminometer can be transmitted to PC to analyze, print and record, etc.

II Unpacking Inspection

Unpack and check, if there is any damage or loss, contact with the nearest local

sales service agency

1. Mainframe 1 pc

2. Instruction manual 1 pc

3. USB testing line (only for UT382) 1 pc

4. Software disc(only for UT382) 1 pc

5. 9V battery 1 pc

6. Sensitive mirror cap 1 pc

III Safety Instruction

Warning

Actions and conditions that may pose hazard to the user or may cause

damage to the Luminometer.

please use the luminometer as specified in the manual, otherwise it may cause

damage to the luminometer or personal injury. In order to avoid luminometer

damage and personal injury, please operate according to following instructions.

Check if luminometer shell is broken or any part is lost before using. Do not ●

use the meter if it is damaged.

When battery indicating sign “ ” appears, please replace battery as soon ●

as possible to avoid measured data error.

When the luminometer works abnormally, do not use it, and please send it to ●

the designated maintenance center of our company for repair by professional

personnel.

Please do not use it in the place adjacent to gas, steam and dust.● explosive

Do not dismantle the shell of luminometer without authorization to avoid ●

luminometer damage.

Do not charge the battery to avoid battery and personal injury. ● explosion

Please pay attention to the “+” and “-” of the battery during installing.

Especially keep the sensitive mirror clean and away from scratch, cover it ●

with cap after completing measurement.

1 Sensitive mirror

2 Mainframe

3 Display screen

4 Keyboard

IV Meter Structure

1. Meter structure (Figure 1,Table 1)

Figure 1

Table 1

2. Display symbols (Figure 2, Table 2)

Figure 2

Auto range

Minimum value display

Maximum value display

Data hold

Main display

Full storage display

Auto power off

USB communication (UT382 only)

Low battery Indication

record number

Secondary display

Data record storage

Indicator for "reading ×10"

Illuminance unit )(Lux

Illuminance unit (Britain and USA)

MIN

Auto

MAX

HOLD

FULL

USB

LoadNo

REC

Table 2

3.Keys description (Figure 3 )

Figure 3

1. Power on/off key: long press to power on, shot press to power off.

2. Unit selection key: under measuring state, press this key to switch the unit of

reading between and FCLux

3. selection key: under measuring state, press Maximum and minimum values

the key to switch from normal measurement→ MAX→ MIN modes.

When “M ” or “MI sign is displayed on LCD, the luminometer just displays AX N”

maximum or minimum reading.

4. Auto range and Manual range selection key: in auto range state, press the key to

enter manual range state; press once again to enter low range and high range

one by one; long press the key to return to auto range state.

5. Data memory and delete key: press this key to save measured data automatically

or manually, the luminometer can save up to 2044 sets. press this key and power

on the meter at the same time, you can delete the recorded data.

6. Menu key: long press this key to enter the function setting mode; short press to

access USB→APO→ SEC→ CODE→ DEF?→ Normal measurement;

press HOLD key to t menu mode.exi

7. Data hold key: press this key to lock the measured data display on LCD, and

display “H LD” sign at the same time; press this key again to t hold function.O exi

V Setting and Operation

1. Auto power off: power off in about 10 minutes automatically

Auto power off or not selection setting function: long press “ME to enter ● NU”

function selection menu, and then short press it to select “ 0” or “ 1” APO. APO.

interface, and then press “RA GE/+” or “M MI /-” key to switch between N AX/ N

“ 0” and “ 1”; press “ME key to enter t function setting or APO. APO. NU” nex

press “H LD” key to t function setting, and luminometer will record the O exi

updated settings.

, auto power off function is closed, namely, the ● When "APO.0" is selected

meter won’t be power off automatically; to powerif "APO.1" is applied, au

off function is selected, and the auto power off sign is displayed on the

screen at the same time. After power off, the luminometer will record the

settings which will be restored after it is power on, it is unnecessary to set

up again at each time.

2. Data memory and delete: auto and manual data memory

The interval of auto data memory is within 0.5-255 seconds, which is ●

adjustable; long press “ME to enter function selection menu, and then NU”

short press it to select SECREC interface, while the auto memory interval is

displayed on the main display; press “RA GE/+” or “M MI /-” key to adjust N AX/ N

the auto memory interval; press “ME key to enter t function setting or NU” nex

press “H LD” to t function setting. And luminometer will save the updated O exi

settings.

Long press “REC/ERASE” to save data automatically, and “REC” sign ●

on secondary display , and the luminometer will save the ﬂashes

measured data according to the current auto saving interval setting; if the

storage space of luminometer is fully taken up, the system will t auto exi

memory; and “FULL” sign will be displayed on LCD; press “REC/ERASE” key

to t auto data memory function.exi

Manual data memory: in the normal measurement state●, press “REC/ERASE”

once to save one measured data, and “REC” sign displayed on secondary

display once.ﬂashes

When 2044 pieces of data is fully recorded, “FULL” sign will be displayed on ●

LCD, and no data can be saved at this moment.

Under power-off state, press “REC/ERASE” and power on meanwhile, when ●

“CLR” sign is displayed on LCD, all saved data will be cleared.

3. View saved data:

Short press “ME to enter view recorded data function; if there is no ● NU”

data record in the luminometer, “ ” sign will be displayed on both LCD －－－－

main display and secondary display, and the luminometer will return to normal

measurement state in about 0.5 seconds; If there a certain data records in

the luminometer, the total number of current data records will be displayed on

LCD secondary display, and the value of the last piece of data will be

displayed on the main display.

After entering option of view recorded data, press IT” to view the 1st ● “UN

piece of recorded data; press “RA GE/+” and “M MI /-” keys to view data N AX/ N

records forward or backward; each press on HOLD button to increment by

100 sets, the meter will return to the first record when the maximum number

has been reached.

The luminometer can store up to 2044 records.●

4. Restore to factory defaults:

Long press “ME key to enter function setting, and then short press this ● NU”

key to select and “DEF sign displays on the LCD and "DEF?" option, ?”

, at this moment you can press “H LD” to restore to factory defaults; ﬂashes O

press “ME or “REC/ERASE” NU” to exit.

After restoring to factory defaults, the defaulting state of the system is: USB.0 ●

(no USB transmission); 1 (auto power off); 60s (auto record interval is APO

set up as 60s); clearing all data records.

5.USB data transmission function: (only for UT382, See Figure 4)

Long press “ME to enter USB ● NU”

transmission setting, and “USB.0” or

“USB.1” will be displayed on LCD;

USB.0 means that data can’t be

transmitted; “USB.1” means that data

can be transmitted; press “RA GE/+”N

or “M MI /-” key to switch betweenAX/ N

“USB.0” and “USB.1”.

The meter is set to "USB.0" mode ●

automatically every time it is powered on.

The luminometer (UT382) communicates ●

with PC using USB wire and your PC must

have a USB port. See Figure 4 for the

connection diagram.

When connecting UT382 to the computer, ●

you cannot operate any functional buttons

during transmission. Figure 4

6. Illuminance measurement

In process of measuring illuminance, the sensitive mirror must be ●

perpendicular to the measured illuminating source to ensure accuracy of

measured data..

If distance between measured illuminating source and illuminometer, ●

measuring position, angle or environment is different, then the measured

data will be different; because the intensity of light varies with change of

distance, position, angle and environment.

Make sure there is no scratch or dirt on sensitive mirror of luminometer, or ●

the measured data won’t be accurate.

When the illuminance the measuring range of the luminometer, “ L” ● exceeds O

sign will be displayed.

After completing measuring, cover the sensitive mirror with cap to avoid ●

scratch on sensitive mirror and keep it clean.

VI Spec cationsiﬁ

1. General tionspeciﬁca

Low battery indication:●

Type of sensor: digital visible light sensor●

Sampling rate: 100 times/s●

Power supply: one 1604A 6F22 9V battery●

Battery life: 200 hours for typical battery (alkaline battery)●

Dimensions: 26m● 195mmx 45mmx

Weight: about 185g (including battery)●

2. Environment limit

Indoor use●

Safety standards: E : 2006; ● N61326

E : 1998+A1+A2;N55022

E : 1998+A1+A2N55024

Pollution degree 2●

perating temperature and humidity● O :

0℃-30℃ (no more than 80%RH);

(no more than 75%RH);30℃-40℃

(no more than 45%RH)40℃-50℃

Storage temperature and humidity (no more than 80%RH)●: -20℃-+60℃

3. Electrical tionspeciﬁca

Accuracy tolerance: ± (a%reading +b digits), calibrate once each year ●

Environment temperature: ●23℃±5℃

Environment humidity 80% RH● : ≤

Temperature coef t: 0.1× (accuracy tolerance)/● ﬁcien ℃

Illuminance measurement

Function Range Resolution

Accuracy Tolerance: ± ( a %reading +b digits)

Illuminance

measuring

(LU )X

Illuminance

measuring

(FC)

The accuracy tolerance of FC can

be by unit conversion:veriﬁed

FC=10. , if accuracy tolerance 76lux

veriﬁcation is needed, it can be

achieved by unit conversion.

20Lux

200Lux

2000Lux

20000Lux

2FC

20FC

200FC

2000FC

0.01Lux

0.1Lux

1Lux

10Lux

0.001FC

0.01FC

0.1FC

1FC

± (3% + 20)

± (3% + 8)

VII Maintenance

Warning

During replacing battery or measuring, keep the sensitive mirror from scratch or

dirt to avoid damaging the mirror or the measuring precision; and do inﬂuencing

not charge the replaced battery to avoid and safety accident!explosion

1. Battery installation and replacement

When “ ” is displayed on the luminometer, replace the battery immediately.

Replace the battery by following procedures:

Power off●

Loosen the screw of battery cover and take it off. ●

Replace with a new 6LF22 9V 1604A battery, please use battery with the ●

same model, and do not use unauthorized battery.

Pay attention to the anode “+” and the cathode “-”. After completing ●

installation, install the cover and tighten the screw.

2. General maintenance

When the surface of luminometer is dirty, clean with wet cloth and neutral ●

detergent, grinding miller and solvent are forbidden.

When the luminometer is damaged and needs to be repaired, please send it ●

to the designated maintenance center of our company for repair by

professional service man, do not repair it without authorization.

Especially in the process of using, keep the sensitive mirror of luminometer ●

away from scratch or dirt to avoid damaging the mirror or the inﬂuencing

measuring precision.

Remove the battery if it won’t be used for a long time.●

Store the luminometer in a place free of moist, high temperature and strong ●

magnetic .ﬁeld

S tions and other information shown on this instruction manual are subject peciﬁca

to change without notice

LCD: 3 1/2-bit display, 2000-count.●

ver range display: “ L”● O O

P/N:110401104377X DATE:2018.06.26 REV.5

Product specificaties

Merk:	Uni-T
Categorie:	Lichtmeter
Model:	UT382

Heb je hulp nodig?

Als je hulp nodig hebt met Uni-T UT382 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Lichtmeter Uni-T

Uni-T UT383BT Handleiding

6 Maart 2024

Uni-T UT381A Handleiding

6 Maart 2024

Uni-T UT382 Handleiding

6 Maart 2024

Handleiding Lichtmeter

Nieuwste handleidingen voor Lichtmeter

Voltcraft LX-80 Handleiding

8 April 2024

Kyoritsu KEW 5204BT Handleiding

5 Januari 2024

Kyoritsu KEW 5204 Handleiding

4 Januari 2024

Delta Ohm HD2402 Handleiding

27 November 2023

Klein Tools ET130 Handleiding

14 November 2023

Gossen STARLITE 2 Essentials Handleiding

15 Augustus 2023

Gossen STARLITE 2 Handleiding

15 Augustus 2023

Sekonic L-248 Handleiding

20 Maart 2023

Steren HER-408 Handleiding

30 Juni 2023

Testo 545 Handleiding

29 Juni 2023