Uline H-8094 Handleiding

Bekijk gratis de handleiding van Uline H-8094 (9 pagina’s), behorend tot de categorie Hittepistool. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 2 reviews. Heb je een vraag over Uline H-8094 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 20525 IH-8094

H-8094

DELUXE HEAT GUN

1-800-295-5510

uline.com

Before performing any application, it is recommended

to experiment with a piece of scrap material.

1. Plug heat gun into properly rated outlet.

2. Turn switch to "II" position and the heat gun will have

full operating temperature in approximately two

minutes.

3. Adjustable stand is provided and allows nozzle to be

rotated from almost horizontal to vertical position.

4. To turn off heat gun after use, move switch to "I"

position. Run on cold for about three minutes. This

will allow the heat gun to cool down and the nozzle

become cool to the touch.

5. After the nozzle cools down, turn switch to "O"

position.

WARNING! This product is a source of very high

temperature. Always follow safety precautions

to reduce the risk of fire, electric shock, or any

other injury.

WARNING! Keep a fire extinguisher handy and

observe all fire precautions.

1. Keep the heat gun away from heat, rain or moisture

exposure to reduce the risk of fire.

2. Do not direct the hot air stream to your clothing,

hands or any other body parts.

3. Keep out of reach of children.

4. Keep Nozzle face at least 1" away from shrink wrap

or from work surface.

5. Use heat gun in a well ventilated area.

SAFETY INSTRUCTIONS

OPERATION

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

TOOLS NEEDED

Phillips ScrewdriverNeedle Nose Pliers

• 120 V 1740 W

• 14.5 amps

• 3-prong plug

non-adjustable temp. 1,200º F

Product specificaties