Uline H-6460 Handleiding
Uline Stofzuiger H-6460
Bekijk gratis de handleiding van Uline H-6460 (30 pagina’s), behorend tot de categorie Stofzuiger. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 3 reviews. Heb je een vraag over Uline H-6460 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/30

PAGE 1 OF 30 0625 IH-5048
H-5048, H-6460
INDUSTRIAL
BACKPACK VACUUMS
1-800-295-5510
uline.com
WARNING! Read owner's manual before using
this product. Failure to do so can result in injury
or property damage.
NOTE: Following the cleaning instructions will
prolong the life of vacuum.
• Carefully unpack and inspect vacuum for shipping
damage. Each vacuum is tested and thoroughly
inspected before shipping.
• Use only as described in these instructions. Use only
the recommended attachments and replacement
parts.
• To reduce the risk of overheating, sparking or
damage to cords, do not tie pigtail and extension
cord in knot in an attempt to prevent cords from
pulling apart. Use the provided cord holder to keep
extension cord plugged in to vacuum.
• Do not leave vacuum plugged in when not in use.
Unplug vacuum from the outlet before servicing.
Do not leave running while unattended. Turn off the
vacuum before unplugging.
• Do not use outdoors or on wet surfaces.
• Do not try to recover any liquid with this vacuum.
This vacuum is for dry recovery only.
• Do not use a damaged cord or plug. If the
vacuum is not working as it should, or if it has
been dropped, damaged, left outdoors or
exposed to water, contact Uline Customer Service
at 1-800-295-5510.
• Do not allow the vacuum to be used as a toy.
Pay close attention when using the vacuum near
children.
• Do not pull or carry the vacuum by the cord or
use the cord as a handle. Do not close a door on
the cord or pull the cord around sharp edges or
corners. Do not run over the cord. Keep the cord
away from heated surfaces.
• Do not pull on the cord to unplug. Grasp and pull
the plug, not the cord.
• Do not handle the plug, switch or vacuum with wet
hands.
• Do not put any objects into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair and anything else that may reduce airflow.
• Keep hair, loose clothing, fingers and all parts of
body away from openings and moving parts.
• Use with extra care when cleaning stairs.
• Do not vacuum flammable or combustible
materials or anything that is burning or smoking,
such as cigarettes, matches or hot ashes.
• Sparks inside the motor can ignite flammable
vapors or dust. To reduce the risk of fire or
explosion, do not use near combustible liquids,
gases or dusts, such as gasoline and other fuels,
lighter fluid, cleaners, oil-based paints or natural
gas.
• To reduce the risk of inhaling toxic vapors or dust,
do not vacuum or use near toxic or hazardous
materials.
• Empty the Intercept Micro
®
Filter after every use
and before storage. Some types of wood dust and
debris may catch on fire if stored in the vacuum.
• Do not use without filters in place.
• Connect to a properly grounded outletonly.
NOTE: If the thermal protection cutoff switch
is tripped, immediately turn off the vacuum,
inspect for a blockage and verify the condition
of the filter bag. Replace or empty the filter
bag as required. The vacuum will require
several minutes to cool down to a safe
operating temperature. When cool enough,
the thermal switch will reset and user can
resume normal use of the vacuum.
SAFETY
Para Español, vea páginas 11-20.
Pour le français, consulter les pages 21-30.
TOOL NEEDED
#3 Phillips Screwdriver
Product specificaties
| Merk: | Uline |
| Categorie: | Stofzuiger |
| Model: | H-6460 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uline H-6460 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Stofzuiger Uline
20 April 2026
13 Februari 2026
12 Februari 2026
12 Februari 2026
12 Februari 2026
Handleiding Stofzuiger
Nieuwste handleidingen voor Stofzuiger
16 April 2026
13 April 2026
12 April 2026
11 April 2026
11 April 2026
11 April 2026
11 April 2026
7 April 2026
7 April 2026
7 April 2026