Uline H-10751 Handleiding

Bekijk gratis de handleiding van Uline H-10751 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Uline H-10751 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 3 0123 IH-10751

1-800-295-5510

uline.com

CLEANROOM GOWNING

BENCH

H-10751, H-10752

1. Position bench at desired location. Using pre-drilled

holes in leg bases as templates, mark each hole

location.

2. Using a 1/2" masonry drill bit, drill holes at all marked

locations approximately 2" deep

.

3. Insert anchor bolt and sleeve into hole. Ensure sleeve

is flush with floor and bolt threads are above floor

level.Repeat for remaining anchors.

4. Align holes in leg base with anchors in concrete.

Place washer and nut onto threaded portion of

anchor bolt. Tighten using Drill and 14mm nut

driver bit. Repeat for remaining holes. (See Figure 3)

PARTS

ASSEMBLY

CONCRETE ANCHORING

Drill

TOOLS NEEDED

1/2" Masonry Drill Bit

1. Lay bench top on a smooth, non-marring surface

with

leg mounts face up.

Align legs with leg mounts

on bench top. (See Figure 1)

2. Secure legs to bench top with set screws.

Repeat for

remaining leg. (See Figures 1-2)

Leg x 2

Para Español, vea página 2.

Pour le français, consulter la page 3.

14 mm Nut Driver Bit

Figure 1

Figure 3

Figure 2

Bench Top x 1Set Screw x 8

Anchor Hardware Set x 8

(Anchor Bolt, Anchor Sleeve, Washer,

Lock Washer and Nut)

Nut

Lock Washer

Washer

Anchor Sleeve

Anchor Bolt

Leg Base

Product specificaties