Ubiquiti Networks SunMAX SM-SP-40 Handleiding

Ubiquiti Networks Oplader voor mobiel apparaat SunMAX SM-SP-40

Lees hieronder de 📖 handleiding in het Nederlandse voor Ubiquiti Networks SunMAX SM-SP-40 (21 pagina's) in de categorie Oplader voor mobiel apparaat. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
4x PoE Smart MPPT Charger
Model: SM-SP-40
SolarPoint
Introduction
Thank you for purchasing the Ubiquiti® SolarPoint MPPT ™
Charger. This Quick Start Guide is designed to guide you through
installation and includes the warranty terms.
Package Contents
SolarPoint H4 Connector
Removal Tool
Ferrules
(Qty. 6)
Metal Strap
Wall Mount Kit Screw Kit NTC Thermistor Zip Tie
Installation Requirements
• Flathead screwdriver
• 7 mm socket wrench
• Ferrule crimper or pliers
• 18 - 14 AWG wires for battery connection
• 24V or 2x 12V SLA, AGM, or Gel Lead battery
• Solar panel with H4 connectors (10 - 60V open circuit voltage)
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections
• We recommend that you protect your networks from harmful
outdoor environments and destructive ESD events with
industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit: ui.com/toughcable
Hardware Overview
Reset
Button
Power
Terminal
Battery
Terminal
Ethernet
Ports
Output
LED
System
LED
PV Panel
Terminal
PV Panel
Terminal
Interface Description
System LED
Steady on when system is powered on;
Red when battery polarity is reversed.
Reset
Button
Press and hold the Reset button for 10
seconds to restore factory default settings.
Press and hold the Reset button for 16
seconds if:
• The device does not respond to a factory
reset.
• The web interface is unreachable.
• There doesn't appear to be any other
noticeable activity
Battery Terminal
Four-pin terminal block for NTC and battery
Power Terminal
Two-pin terminal block for power (24VDC out)
PV Panel Terminals
H4 connectors for solar panel
Ethernet Ports
Supports 10/100 Ethernet connections and
passive 24V, 2-pair PoE output.
Output LED
Steady on when output power is enabled.

Product specificaties

Merk: Ubiquiti Networks
Categorie: Oplader voor mobiel apparaat
Model: SunMAX SM-SP-40

Heb je hulp nodig?

Als je hulp nodig hebt met Ubiquiti Networks SunMAX SM-SP-40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Oplader voor mobiel apparaat Ubiquiti Networks

Ubiquiti Networks

Ubiquiti Networks SunMAX SM-SP-40 Handleiding

26 Maart 2023

Handleiding Oplader voor mobiel apparaat

Nieuwste handleidingen voor Oplader voor mobiel apparaat

Basetech

Basetech PPC-5MU-N Handleiding

17 April 2024
Acme Made

Acme Made CH05 Handleiding

16 April 2024
PeakTech

PeakTech 3125 Handleiding

10 April 2024
Scosche

Scosche MagicMount Base MS Handleiding

9 April 2024
Scosche

Scosche MagicMount Base Pro Handleiding

9 April 2024
Scosche

Scosche MagicMount Travel Handleiding

9 April 2024
Voltcraft

Voltcraft UC-4AXX001 Handleiding

8 April 2024
ILive

ILive IACQ60 Handleiding

2 April 2024
ILive

ILive IAQST303 Handleiding

2 April 2024
Conceptronic

Conceptronic CUSBCHARKIT Handleiding

13 Maart 2024