Ubiquiti Networks EdgeRouter Pro ERPro-8 Handleiding
Ubiquiti Networks
Router
EdgeRouter Pro ERPro-8
Bekijk gratis de handleiding van Ubiquiti Networks EdgeRouter Pro ERPro-8 (20 pagina’s), behorend tot de categorie Router. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 5.0 sterren uit 14.5 reviews. Heb je een vraag over Ubiquiti Networks EdgeRouter Pro ERPro-8 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/20
8-Port Router
with 2 Combination
SFP/RJ45 Ports
Model: ERPro-8
Introduction
Thank you for purchasing the Ubiquiti Networks®
EdgeRouter ™PRO, which is part of the EdgeMAX® platform.
Formore information, visit www.ubnt.com/edgemax
This Quick Start Guide is designed to guide you through
installation and show how to access the EdgeOS™
Configuration Interface. This guide also includes the warranty
terms and is for use with the EdgeRouter PRO, modelERPro-8.
Package Contents
EdgeRouter PRO
8-Port Router
with 2 Combination
SFP/RJ45 Ports
Model: ERPro-8
Power Cord Mounting Screws
(#10-32 x 5/8", Qty. 4)
Cage Nuts
(#10-32 x 5/8", Qty. 4)
Quick Start
Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
Hardware Overview
Front Panel Ports
Console RJ45 (eth0-eth7) SFP (eth6-eth7)
USB
Interface Description
Console
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
• Baud rate 115200
• Data bits 8
• NONEParity
• 1Stop bits
• NONEFlow control
USB Reserved for future use.
RJ45
(eth0-eth7)
RJ45 ports support 10/100/1000 Ethernet
connections. RJ45 port eth6 or eth7 is
active only if the corresponding SFP port
is empty.
SFP
(eth6-eth7)
SFP ports are hot-swappable and support
100 Mbps or Gigabit fiber SFP modules. If
an SFP module is plugged in, then the SFP
port is active, and the corresponding RJ45
port is deactivated.
Product specificaties
| Merk: | Ubiquiti Networks |
| Categorie: | Router |
| Model: | EdgeRouter Pro ERPro-8 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ubiquiti Networks EdgeRouter Pro ERPro-8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Router Ubiquiti Networks
25 April 2025
27 Augustus 2024
24 Augustus 2023
24 Augustus 2023
7 Juli 2023
31 Mei 2023
13 Mei 2023
11 Mei 2023
30 April 2023
22 April 2023
Handleiding Router
Nieuwste handleidingen voor Router
5 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
2 Juli 2025
6 Juni 2025
3 Juni 2025