Ubiquiti Networks BM2HP Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ubiquiti Networks BM2HP (40 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
Models:
Bullet/Pico/NanoStation/loco
English
Deutsch
Español
Français
Italiano
1
Typical Deployment
English
Typical Deployment
Bullet PicoStation NanoStationloco NanoStation
LAN or Computer to
Ethernet Port labeled
LAN on PoE Adapter
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE on PoE Adapter
Connect the Power Cord
to the PoE Adapter and
a power outlet
POE
Host Computer IP Address
192.168.1.x
LAN
Default IP Address
192.168.1.20
Note: Shielded Category 5 (or above) cabling should be
used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the customer’s responsibility to follow local country regulations, including operation
within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.


Product specificaties

Merk: Ubiquiti Networks
Categorie: Access point
Model: BM2HP
Kleur van het product: Wit
Gewicht: 180 g
Breedte: 37 mm
Diepte: 152 mm
Hoogte: 31 mm
Materiaal behuizing: Kunststof
LED-indicatoren: Ja
Frequentie van processor: 400 MHz
Processormodel: Qualcomm Atheros
Frequentieband: 2.4 GHz
Aantal Ethernet LAN (RJ-45)-poorten: 1
Vermogensverbruik (max): 7 W
Certificering: ETSI300-019-1.4, FCC Part 15.247, IC RS210, CE, RoHS
Intern geheugen: 32 MB
Processor architectuur: MIPS 24Kc
Type processor: Ja
Gevoeligheid ontvanger: -96dBm +/-2dB
Ethernet LAN, data-overdrachtsnelheden: 10, 100 Mbit/s
Netwerkstandaard: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Aantal gebruikers: - gebruiker(s)
Intern: Nee
Ondersteunde netwerkprotocollen: TCP/IP
Flash memory: 8 MB
Aansluiting antenne: N-type
Maximale overdrachtssnelheid van gegevens: 100 Mbit/s
2,4 GHz: Ja
Power over Ethernet (PoE): Ja
Antennefuncties: Ingebouwde antenne
Aantal kanalen: - kanalen
Maximum outdoorbereik: 50000 m
Zendvermogen: 28 dBmW
Bedrijfstemperatuur (T-T): -20 - 70 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent

Heb je hulp nodig?

Als je hulp nodig hebt met Ubiquiti Networks BM2HP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point Ubiquiti Networks

Handleiding Access point

Nieuwste handleidingen voor Access point