Tycon Systems TP-SCPOE-2424-HP Handleiding

Tycon Systems Batterij-oplader TP-SCPOE-2424-HP

Lees hieronder de 📖 handleiding in het Nederlandse voor Tycon Systems TP-SCPOE-2424-HP (6 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

TYCON POWER SYSTEMS

TYCON

TP-SCPOE-24xx-HP Series

Solar & PoE Battery Charger

USER’S MANUAL

User’s Manual

TP-SCPOE-24XX-HP Series

Features:

 Battery Polarity Reverse Protection

 Battery Over Charge Protection

 Battery Over Discharge Protection

 Solar Panel Polarity Reverse Protection

 Solar Panel Over Charge Protection

 Output Short Circuit Protection

 Output Over Voltage Protection

 POE Output Short Circuit Protection

 POE Output Support 802.3af Function (TP-SCPOE-2448D-HP)

 Two Input method:

(1)Solar Panel (2)PoE Power Source (Always Solar First.)

 Up to Three Outputs:

 DIN Rail Mountable

User’s Manual

TP-SCPOE-24XX-HP Series

Panel Description:

Item Name Descriptions

1 POE : PoE power input indicator: the LED lights when the PoE input jack

(the lower jack) has 36V~57V input.

2 SOL : Solar power input indicator: the LED lights when SOL terminal is

connecting to a solar panel.

3 CHA : Charging indicator: the LED lights when BAT terminal is connected

to battery and charging, the charger power may from solar or PoE.

4 LOA : Loading indicator: the LED lights when the rear panel output

terminal is connecting to a device and oﬀering power.

The LED always on when power ready.

5 REV : Battery polarity reverse indicator: the LED lights when the battery

polarities are reversed. (detail description see Sec. 5.1)

6 IN : PoE Input Jack: the lower RJ45 jack, used for PoE input. Allowed

input voltage 36~57V

7 OUT : PoE Output Jack: the upper RJ45 jack, used for PoE output; Output

voltage depends on what model you selected.

8 Fuse

Fuse: for output over current protection, limiting the battery output

current <= 10A. (If solar panel or PoE source is installed before the

battery, and if the polarities of battery are reversed, then the fuse will

be burnt.)

9 SOL : Solar Panel Terminal: used to connect the solar panel.

10 BAT : Battery terminal: used to connect the battery.

NOTE: ALWAYS CONNECT THIS TERMINAL FIRST AND

DISCONNECT LAST.

11 LOA : Load Terminal: The output voltage is the same as battery voltage.

Maximum voltage clamped at 24.5V.

Product specificaties

Merk:	Tycon Systems
Categorie:	Batterij-oplader
Model:	TP-SCPOE-2424-HP
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	312 g
Breedte:	159 mm
Diepte:	118 mm
Hoogte:	40 mm
Accu/Batterij voltage:	24 V
Ingangsspanning:	24 V
Stroomspanning bescherming:	Over voltage, Overcharge, Overdischarge, Reverse polarity, Short circuit
Frequentie:	- Hz
Output current:	1 A
Spanning:	24 V
Capaciteit:	60 W
Stroomverbruik (typisch):	0.5 W
Bedrijfstemperatuur (T-T):	-30 - 60 °C