TW Steel CEO Diver Handleiding

TW Steel Horloge CEO Diver

Lees hieronder de 📖 handleiding in het Nederlandse voor TW Steel CEO Diver (17 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
CEO DIVER
TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. ‘The Watch in Steel’ leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel will
determine whether the appearance of the watch is
maintained in the future, or whether it will deteriorate.
In order to enjoy wearing your TW Steel as long as
possible, we include a number of tips: If the watch
comes into contact with hard or corrosive materials,
this can cause damage, which, if it occurs regularly, will
become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting the
time or date, opening or closing the crown or crowncap,
should not be done roughly, but carefully.
ENGLISH
USE OF THE CROWN
To adjust the time or set the date you î‚¿rst have to
unscrew the crown counter-clockwise. Pull the crown
out to the 1st or 2nd position. After adjusting, screw
the crown clockwise back on the case.
ADJUSTING THE TIME
Pull the crown out to the 2nd click position so that the
second hand stops at (0) position. Turn the crown to
set the hour and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown clockwise to set the date. After the date has
been set, push the crown back to the normal position.
USING THE CHRONOGRAPH
Hour hand
Chronograph
second hand
Date
(0) position
Minute hand
Crown / normal
crown position
The chronograph is able to measure and display the time ac-
curately to 1/20th of a second, up to a maximum of 59 minutes and
59 seconds. The retrograde chronograph 1/20 second hand keeps
running continuously for 30 seconds after starting and then stops at
the (0) position. The chronograph can be started and stopped each
time button A is pressed. Pressing button B resets the chronograph.
All hands return to their (0) position.
If the chronograph second hand and the chronograph 1/20 second
hand do not return to the (0) position after the chronograph has
been reset or after the battery has been replaced, you should do the
following. Pull the crown out to the 2nd position. Press button A to
set the chronograph second hand to the (0) position. Press button
B to set the chronograph 1/20 second hand to the (0) position. The
chronograph second hands can be advanced rapidly by continuously
pressing button A or B. Once the hands have returned to the (0)
position, return the crown to its normal position and screw the crown
cap clockwise back to the case.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Chronograph
minute hand
Second hand
Button A
24-hour hand
Button B


Product specificaties

Merk: TW Steel
Categorie: Horloge
Model: CEO Diver

Heb je hulp nodig?

Als je hulp nodig hebt met TW Steel CEO Diver stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge TW Steel

Handleiding Horloge

Nieuwste handleidingen voor Horloge