Troy-Bilt TB280 ES Handleiding

Troy-Bilt Grasmaaier TB280 ES

Lees hieronder de 📖 handleiding in het Nederlandse voor Troy-Bilt TB280 ES (32 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Safe Operation Practices • Set-Up • Operation • Service • Troubleshooting

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

OperatOr’s Manual

Form No. 769-11150A

(August 25, 2016)

Safe Operation Practices ........................................ 2

Assembly & Set-Up 6 ..................................................

Controls & Operation .............................................. 9

Service .....................................................................11

Troubleshooting .....................................................14

Spanish .................................................................... 17

Parts/Warranty See Separate Supplement ..............

Table of Contents

NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all

models and the model depicted may differ from yours.

Self Propelled Mower

Front Wheel Drive

Model Series A & B

Important Safe Operation Practices 1

WARNING! This symbol points out

important safety instructions which,

if not followed, could endanger the

personal safety and/or property of

yourself and others. Read and

follow all instructions in this manual before

attempting to operate this machine. Failure to

comply with these instructions may result in

personal injury. When you see this symbol.

HEED ITS WARNING!

DANGER: This machine was built to

be operated according to the safe

operation practices in this manual.

As with any type of power

equipment, carelessness or error on

the part of the operator can result in serious

injury. This machine is capable of amputating

fingers, hands, toes and feet and throwing foreign

objects. Failure to observe the following safety

instructions could result in serious injury or death.

CALIFORNIA PROPOSITION 65

WARNING! Engine Exhaust,

some of its constituents, and

certain vehicle components

contain or emit chemicals

known to State of California to cause cancer

and birth defects or other reproductive harm.

Battery posts, terminals, and related

accessories contain lead and lead compounds,

chemicals known to the State of California to

cause cancer and reproductive harm. Wash

hands after handling.

General Operation

1. Read this operator’s manual carefully

in its entirety before attempting

to assemble this machine. Read,

understand, and follow all instructions

on the machine and in the manual(s)

before operation. Keep this manual

in a safe place for future and regular

reference.

2. Be completely familiar with the controls

and the proper use of this machine

before operating it.

3. This machine is a precision piece of

power equipment, not a plaything.

Therefore, exercise extreme caution

at all times. This machine has been

designed to perform one job: to mow

grass. Do not use it for any other

purpose.

4. Never allow children under 14 years of

age to operate this machine. Children 14

and over should read and understand

the instructions and safe operation

practices in this manual and on the

machine and should be trained and

supervised by an adult.

5. Only responsible individuals who

are familiar with these rules of safe

operation should be allowed to use this

machine.

6. Thoroughly inspect the area where

the equipment is to be used. Remove

all stones, sticks, wire, bones, toys and

other foreign objects, which could be

tripped over or picked up and thrown

by the blade. Thrown objects can cause

serious personal injury.

7. Plan your mowing pattern to avoid

discharge of material toward roads,

sidewalks, bystanders and the like. Also,

avoid discharging material against a

wall or obstruction, which may cause

discharged material to ricochet back

toward the operator.

8. To help avoid blade contact or a thrown

object injury, stay in operator zone

behind handles and keep children,

bystanders, helpers and pets at least 75

feet from mower while it is in operation.

Stop machine if anyone enters area.

9. Always wear safety glasses or safety

goggles during operation and while

performing an adjustment or repair to

protect your eyes. Thrown objects which

ricochet can cause serious injury to the

eyes.

10. Wear sturdy, rough-soled work shoes

and close-fitting slacks and shirts. Shirts

and pants that cover the arms and legs

and steel-toed shoes are recommended.

Never operate this machine in bare feet,

sandals, slippery or light-weight (e.g.

canvas) shoes.

11. Do not put hands or feet near rotating

parts or under the cutting deck. Contact

with blade can amputate fingers, hands,

toes and feet.

12. A missing or damaged discharge cover

can cause blade contact or thrown

object injuries.

13. Many injuries occur as a result of the

mower being pulled over the foot during

a fall caused by slipping or tripping.

Do not hold on to the mower if you are

falling; release the handle immediately.

14. Never pull the mower back toward

you while you are walking. If you must

back the mower away from a wall or

obstruction first look down and behind

to avoid tripping and then follow these

steps:

a. Step back from mower to fully

extend your arms.

b. Be sure you are well balanced

with sure footing.

c. Pull the mower back slowly, no

more than half way toward you.

d. Repeat these steps as needed.

15. Do not operate the mower while under

the influence of alcohol or drugs.

16. Do not engage the self-propelled

mechanism on machines so equipped

while starting engine.

17. The blade control is a safety device.

Never attempt to bypass its operation.

Doing so makes the safety device

inoperative and may result in personal

injury through contact with the

rotating blade. The blade control must

operate easily in both directions and

automatically return to the disengaged

position when released.

18. Never operate the mower in wet grass.

Always be sure of your footing. A slip

and fall can cause serious personal

injury. If you feel you are losing your

footing, release the blade control handle

immediately and the blade will stop

rotating within three seconds.

19. Mow only in daylight or good artificial

light. Walk, never run.

20. Stop the blade when crossing gravel

drives, walks or roads.

21. If the equipment should start to vibrate

abnormally, stop the engine and check

immediately for the cause. Vibration is

generally a warning of trouble.

22. Shut the engine off and wait until

the blade comes to a complete stop

before removing the grass catcher or

unclogging the chute. The cutting blade

continues to rotate for a few seconds

after the blade control is released. Never

place any part of the body in the blade

area until you are sure the blade has

stopped rotating.

23. Never operate mower without proper

trail shield, discharge cover, grass

catcher, blade control or other safety

protective devices in place and working.

Never operate mower with damaged

safety devices. Failure to do so can result

in personal injury.

24. Muffler and engine become hot and can

cause a burn. Do not touch.

25. Never attempt to make a wheel or

cutting height adjustment while the

engine is running.

26. Only use parts and accessories made

for this machine by the manufacturer.

Failure to do so can result in personal

injury.

27. When starting engine, pull cord

slowly until resistance is felt, then pull

rapidly. Rapid retraction of starter cord

(kickback) will pull hand and arm toward

engine faster than you can let go. Broken

bones, fractures, bruises or sprains could

result.

28. If situations occur which are not covered

in this manual, use care and good

judgement. Contact Customer Support

for assistance or the name of the nearest

service dealer.

S 1 — i Section mportant afe peration racticeS o p

Slope Operation

Slopes are a major factor related to slip and

fall accidents, which can result in severe injury.

Operation on slopes requires extra caution.

The machine is heavy and can speed up when

going downhill. Be prepared to maintain

control of the machine. If you feel uneasy on a

slope, do not mow it. For your safety, use the

slope gauge included as part of this manual to

measure slopes before operating this machine

on a sloped or hilly area. If the slope is greater

than 15 degrees, do not mow it.

Do:

1. Mow across the face of slopes; never up

and down to avoid loss of control.

2. Exercise extreme caution when

changing direction on slopes; turn uphill

not down.

3. Watch for holes, ruts, rocks, hidden

objects, or bumps which can cause

you to slip or trip. Tall grass can hide

obstacles.

4. Always be sure of your footing. A slip

and fall can cause serious personal

injury. If you feel you are losing your

balance, release the blade control

handle immediately and the blade will

stop rotating within three (3) seconds.

Do Not:

1. Do not mow near drop-offs, ditches

or embankments, you could lose your

footing or balance.

2. Do not mow slopes greater than 15

degrees as shown on the slope gauge.

3. Do not mow on wet grass. Unstable

footing could cause slipping.

Children

Tragic accidents can occur if the operator is not

alert to the presence of children. Children are

often attracted to the mower and the mowing

activity. They do not understand the dangers.

Never assume that children will remain where

you last saw them.

1. Keep children out of the mowing area

and under watchful care of a responsible

adult other than the operator.

2. Be alert and turn mower off if a child

enters the area.

3. Before and while moving backwards,

look behind and down for small children.

4. Use extreme care when approaching

blind corners, doorways, shrubs, trees,

or other objects that may obscure your

vision of a child who may run into the

mower.

5. Keep children away from hot or running

engines. They can suffer burns from a

hot muffler.

6. Never allow children under 14 years of

age to operate this machine. Children 14

and over should read and understand

the instructions and safe operation

practices in this manual and on the

machine and be trained and supervised

by an adult.

7. After stopping engine, remove Electric

Start Push Key (if equipped) and keep

it in a safe place out of the reach of

children.

Service

Safe Handling Of Gasoline:

1. To avoid personal injury or property

damage use extreme care in handling

gasoline. Gasoline is extremely

flammable and the vapors are explosive.

Serious personal injury can occur when

gasoline is spilled on yourself or your

clothes, which can ignite. Wash your skin

and change clothes immediately.

2. Use only an approved gasoline

container.

3. Never fill containers inside a vehicle or

on a truck or trailer bed with a plastic

liner. Always place containers on the

ground away from your vehicle before

filling.

4. Remove gas-powered equipment from

the truck or trailer and refuel it on the

ground. If this is not possible, then

refuel such equipment on a trailer with

a portable container, rather than from a

gasoline dispenser nozzle.

5. Keep the nozzle in contact with the rim

of the fuel tank or container opening at

all times until fueling is complete. Do not

use a nozzle lock-open device.

6. Extinguish all cigarettes, cigars, pipes

and other sources

of ignition.

7. Never fuel machine indoors because

flammable vapors will accumulate in

the area.

8. Never remove gas cap or add fuel while

engine is hot or running. Allow engine

to cool at least two minutes before

refueling.

9. Never over fill fuel tank. Fill tank to no

more than 1 inch below bottom of filler

neck to provide for fuel expansion.

10. Replace gasoline cap and tighten

securely.

11. If gasoline is spilled, wipe it off the

engine and equipment. Move machine

to another area. Wait 5 minutes before

starting engine.

12. Never store the machine or fuel

container near an open flame, spark or

pilot light as on a water heater, space

heater, furnace, clothes dryer or other

gas appliances.

13. To reduce fire hazard, keep machine free

of grass, leaves, or other debris build-up.

Clean up oil or fuel spillage and remove

any fuel soaked debris.

14. Allow machine to cool at least 5 minutes

before storing.

General Service:

1. Never run an engine indoors or in a

poorly ventilated area. Engine exhaust

contains carbon monoxide, an odorless

and deadly gas.

2. Before cleaning, repairing, or inspecting,

make certain the blade and all moving

parts have stopped. Disconnect the

spark plug wire and ground against the

engine and remove Electric Start Push

Key (if equipped) to prevent unintended

starting.

3. Check the blade and engine mounting

bolts at frequent intervals for proper

tightness. Also, visually inspect blade

for damage (e.g., bent, cracked,

worn). Replace blade with the original

equipment manufacture’s (O.E.M.)

blade only, listed in this manual. “Use

of parts which do not meet the original

equipment specifications may lead to

improper performance and compromise

safety!”

4. Mower blades are sharp and can cut.

Wrap the blade or wear gloves, and use

extra caution when servicing them.

5. Keep all nuts, bolts, and screws tight to

be sure the equipment is in safe working

condition.

6. Never tamper with safety devices. Check

their proper operation regularly.

7. After striking a foreign object, stop

the engine, disconnect the spark plug

wire and ground against the engine.

Thoroughly inspect the mower for any

damage. Repair the damage before

starting and operating the mower.

8. Never attempt to make a wheel or

cutting height adjustment while the

engine is running.

9. Grass catcher components, discharge

cover, and trail shield are subject to

wear and damage which could expose

moving parts or allow objects to be

thrown. For safety protection, frequently

check components and replace

immediately with original equipment

manufacturer’s (O.E.M.) parts only, listed

in this manual. “Use of parts which

do not meet the original equipment

specifications may lead to improper

performance and compromise safety!”

10. Do not change the engine’s governor

setting or over-speed the engine. The

governor controls the maximum safe

operating speed of the engine.

11. Check fuel line, tank, cap, and fittings

frequently for cracks or leaks. Replace if

necessary.

12. Do not crank engine with spark plug

removed.

13. Maintain or replace safety and

instruction labels, as necessary.

14. Observe proper disposal laws and

regulations. Improper disposal of

fluids and materials can harm the

environment.

Product specificaties

Merk:	Troy-Bilt
Categorie:	Grasmaaier
Model:	TB280 ES

Heb je hulp nodig?

Als je hulp nodig hebt met Troy-Bilt TB280 ES stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grasmaaier Troy-Bilt

Troy-Bilt Mustang Z54 XP Handleiding

31 Januari 2024

Troy-Bilt TB300 XP Handleiding

31 Januari 2024

Troy-Bilt TBWC23B XP Handleiding

31 Januari 2024

Troy-Bilt TB18R Handleiding

31 Januari 2024

Troy-Bilt TB16R Handleiding

31 Januari 2024

Troy-Bilt TB280 ES Handleiding

31 Januari 2024

Troy-Bilt Mustang Pivot S 54 Handleiding

31 Januari 2024

Troy-Bilt TBWC28T Handleiding

31 Januari 2024

Troy-Bilt Mustang Pivot 54 Handleiding

31 Januari 2024

Troy-Bilt Mustang Z46 Handleiding

31 Januari 2024

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Garda GBR 51 S HW Handleiding

25 April 2024

Garda GAR 40 S-P Handleiding

25 April 2024

Bestgreen BG Serie 1 36 Li Handleiding

18 April 2024

Powerbase PBPM 40P Handleiding

18 April 2024

Worx WG330E Handleiding

17 April 2024

Fieldmann FZR 5316-170B Handleiding

11 April 2024

Fieldmann FZR 4006-80BH Handleiding

11 April 2024

Cub Cadet Ultima ZTS1 46 Handleiding

9 April 2024

Cub Cadet Tank M72-CAT Handleiding

9 April 2024

Cub Cadet Tank M60 KH Handleiding

9 April 2024