Triton T20ID Handleiding

Triton Schroef/boormachine T20ID

Lees hieronder de 📖 handleiding in het Nederlandse voor Triton T20ID (84 pagina's) in de categorie Schroef/boormachine. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84

tritontools.com

T20 ID

20V Impact Driver

Operating and

Safety Instructions

Bedienings- en

veiligheidsvoorschriften

Instruções de

Operação e Segurança

Instructions d’utilisation

et consignes de sécurité

Gebrauchs- und

Sicherheitsanweisung

Istruzioni per l’uso

e la sicurezza

Instrucciones de

uso y de seguridad

ESP

Instrukcja obsługi

i bezpieczestwa

Инструкции по эксплуатации и

правила техники безопасности

Kezelési és

biztonsági utasítások

Provozní a

bezpečnostní pokyny

Prevádzkové a bezpečnostné

pokyny

Çalıma ve

Güvenlik Talimatları

100351_Z1MANPRO1.indd 2 18/08/2014 16:46

Speciﬁcation

Contents

Speciﬁcation 2

Product Familiarisation 3

Description of Symbols 4

General Safety 4

Additional Safety for Battery-Operated Screwdrivers 5

Battery Pack & Charger Safety 5

Intended Use 6

Unpacking Your Tool 6

Before Use 6

Operation 7

Accessories 7

Maintenance 7

Disposal 7

Troubleshooting 8

Guarantee 9

Declaration of Conformity 9

Model number: T20ID

Impact driver

Voltage: 20V, DC

No load speed: 0 - 2200min-1

Impact frequency: 3300min-1

Speed control: Trigger

Maximum torque: 160Nm

Drive: 6mm / 1⁄4" Hex Drive

Weight: 1.59kg / 3.51lbs

Sound and vibration information:

Sound pressure LPA: 84.13dB(A)

Sound power LWA: 95.13dB(A)

Uncertainty K: 3dB

Weighted vibration ah: 3.045m/s2

Uncertainty: 1.5m/s2

The sound intensity level for the operator may exceed 85dB(A) and sound

protection measures are necessary.

Battery

Technology: Samsung Li-Ion cells

Model & capacity: T20HCB, 4.0Ah

T20B, 2.0Ah

Battery charger

Charger model: T20BC

Charging times: 1hr (T20HCB)

30min (T20B)

Input Voltage: EU: 230-240V, AC 50-60Hz, 80W

SA: 230-240V, AC 50-60Hz, 80W

AU: 230-240V, AC 50-60Hz, 80W

JP: 100V, AC 50-60Hz, 1.2A

US/CAN: 120V, AC 60Hz, 1.2A

Power output: 20V, DC, 3.0A

Protection class: (not for US/CAN model)

Length of power cord: 2m

As part of our ongoing product development, speciﬁcations of Triton

products may alter without notice.

WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure if necessary. If sound levels are uncomfortable, even

with ear protection, stop using the tool immediately and check the ear protection is correctly ﬁtted and provides the correct level of sound attenuation for the level

of sound produced by your tool.

WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced ability to grip. Long term exposure can lead to

a chronic condition. If necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal

comfortable temperature, as vibration will have a greater effect. Use the ﬁgures provided in the speciﬁcation relating to vibration to calculate the duration and

frequency of operating the tool.

Sound and vibration levels in the speciﬁcation are determined according to EN60745 or similar international standards. The ﬁgures represent normal use for the tool

in normal working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and vibration. www.osha.europa.

eu provides information on sound and vibration levels in the workplace that may be useful to domestic users who use tools for long periods of time.

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This

product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you

fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Original Instructions

100351_Z1MANPRO1.indd 2 18/08/2014 16:46