Tripp Lite U444-CAT-H Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite U444-CAT-H (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Owner’s Manual
USB Type-C to HDMI over
Cat6 w/ PoC –
1080p/150 ft. (45 m)
Model: U444-CAT-H
USB Type-C and USB-C are trademarks of USB Implementers Forum
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
Español 5 • Français 9 • Русский 13
19-01-469-933939.indb 1 2/12/2019 10:47:04 AM
2
Package Includes
Installation
Product Features
Optional Accessories
U444-CAT-H Screwdriver • Owner’s Manual
Notes:
Test entire installation prior to pulling cables through walls/ceilings.
To achieve maximum distance and performance, use 24 AWG solid-wire Cat6 cable
(such as Tripp Lite N202-Series cable).
• Extend a 1080p video signal over Cat6 up to 150 ft. (45 m) away from your
source
• Built-in equalization (EQ) control allows users to adjust between 8 levels of
video quality
• Power-over-Cable (PoC) technology provides power to the receiver unit
• Local HDMI output on the transmitter enables you to observe the image being
displayed 150 ft. (45 m) away
• Conveniently charge your USB Type-C device with the built-in USB-C port
• HDMI and HDCP 1.4 compliant
• Plug-and-play operation with no software or drivers required
• Tripp Lite N202-Series Solid-Wire Cat6 Patch Cables
• Tripp Lite P568-Series High-Speed HDMI Cables
OR
Up to 150 ft. (45 m) at 1080p (60 Hz)
Local Monitor
(Optional)
Charge your USB Type-C
device (Optional
19-01-469-933939.indb 2 2/12/2019 10:47:04 AM
3
Installation
1. Connect the receiver unit to your HDMI display.
Note: If the green LED does not illuminate after installation is completed, additional
power is required. Connect a user-supplied USB Micro-B cable to the available USB
Micro-B port on the receiver unit.
2. Using a Cat6 patch cable (such as Tripp Lite N202-Series cable, not
included), connect the RJ45 port on the transmitter unit to the RJ45 port on
the receiver unit.
3. Connect the transmitter unit to your USB Type-C source (ex. laptop or
tablet). Both the green LED (indicating power is being supplied) and orange
LED (signal transmission is occurring) on both the transmitter unit and
receiver unit should illuminate at this time.
4. (Optional) Using an HDMI cable (such as Tripp Lite P568-Series cable, not
included), connect a local HDMI monitor to the available local HDMI port on
the transmitter unit.
5. (Optional) Prevent your USB Type-C device from unintentional shutdowns
or battery drain by connecting the source’s included power adapter to the
available USB-C port on the transmitter unit.
6. If necessary, adjust the video quality on your extended monitor using the EQ
control located on the receiver unit.
Note: An improper equalization setting can cause the monitor to not display an
image. Try each equalization setting until an acceptable image is displayed.
Troubleshooting
Specifications
1. An image is not displayed on my remote monitor.
Adjust the equalization settings on the receiver unit until an acceptable
image displays, or add power by connecting a user-supplied USB Micro-B
cable to the available USB Micro-B port on the receiver unit.
Transmitter Unit Ports USB Type-C (M), USB Type-C (F), HDMI (F), RJ45 (F)
Receiver Unit Ports HDMI (M), RJ45 (F), USB Micro-B (F)
Max Resolution 1920 x 1080 @ 60 Hz (1080p)
Audio Support PCM 7.1, DTS & Dolby 5.1
Transmission Distance 150 ft. (45 m)
HDMI Signal HDMI 1.4, HDCP 1.4
Operating Temperature 32° to 104°F (0° to 40°C)
Storage Temperature 5° to 122°F (-15° to 50°C)
Relative Humidity 0% to 85% RH, Non-Condensing
19-01-469-933939.indb 3 2/12/2019 10:47:04 AM


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: U444-CAT-H
Kleur van het product: Zwart
Gewicht verpakking: 220 g
Breedte verpakking: 199.9 mm
Diepte verpakking: 142.2 mm
Hoogte verpakking: 43.9 mm
Soort: AV-zender & ontvanger
LED-indicatoren: Ja
Type verpakking: Doos
USB-connectortype: Micro-USB B, USB Type-C
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Maximum resolutie: 1920 x 1080 Pixels
Land van herkomst: Taiwan
Aantal USB-aansluitingen: 3
Certificering: FCC, CE, REACH
HDCP: Ja
Maximale refresh snelheid: 60 Hz
Materiaal: Acrylonitrielbutadieenstyreen (ABS)
HDMI versie: 1.4
Duurzaamheidscertificaten: RoHS
Plug and play: Ja
Temperatuur bij opslag: -15 - 50 °C
Luchtvochtigheid bij opslag: 0 - 85 procent
Audio-uitgangskanalen: 7.1 kanalen
HDMI in: 1
HDCP versie: 1.4
Bandbreedte: 5 Gbit/s
Aantal HDMI-uitgangen: 1
RJ-45 invoer ports: 2
(Buitenste) hoofdverpakking hoogte: 152.9 mm
(Buitenste) hoofdverpakking breedte: 455.9 mm
(Buitenste) hoofdverpakking brutogewicht: 2450 g
(Buitenste) hoofdverpakking lengte: 213.1 mm
Hoeveelheid per (buitenste) hoofdverpakking: 10 stuk(s)
Maximaal bereik: 45.7 m
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 85 procent
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking: 10037332238808
Ondersteundende kabel types: Cat6, Cat6a

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite U444-CAT-H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd