Tripp Lite T016-004-K Handleiding

Tripp Lite Niet gecategoriseerd T016-004-K

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite T016-004-K (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Owner’s Manual

4-Piece Network Installer

Tool Kit with Carrying Case

Model: T016-004-K

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Contents

• Cable Tester

• Crimping Tool

• LSA Punchdown Tool

• Stripper Tool

• Carrying Case

• Owner’s Manual

16-07-119-9335F3-EN.indd 1 8/5/2016 9:48:43 AM

Operation

Product Features

Note: Before testing, insert a 9V battery (not included) and make sure the cable being

tested is not yet connected to the tester.

Testing is as simple as connecting the desired cable and moving the OFF/

ON/S switch to “ON” for fast LED ﬂashing or “S” for slow. When testing

an uninstalled patch cable, you can leave the Main and Remote testers

connected to each other.

When testing an installed cable, remove the Remote Tester from the Main

Tester. Connect one end of the cable to the appropriate connector on the

Main Tester, and the other end of the cable to the appropriate connector on

the Remote Tester.

Upon switching to the desired testing mode, the LEDs on the Main and

Remote Tester will illuminate to indicate the results.

Connected:

When a connection from one end of the cable to the other is found, the

LEDs on the unit will illuminate. Listed below are the pins that are supposed

to be illuminated for each connector type.

• – Pins 1 through 8 should be connectedRJ45 (UTP)

• ) – Pins 1 through 8 and the G pin should be connectedRJ45 (STP

• – RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11 cables RJ11

use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6

• – Pins 1 through 6 should be connectedRJ12

• Kit includes cable tester, crimping tool, LSA punchdown tool, and stripper

tool along with a carrying case

• RJ45, RJ11 and RJ12 cable tester combines a Main Tester unit with a

removable Remote Tester unit

• Tests cable connectivity, determining a connection, no connection, short

or open circuit, with LED lights indicating the type of connection

•

Features modes for fast and slow ﬂashing of LEDs during automatic testing

16-07-119-9335F3-EN.indd 2 8/5/2016 9:48:43 AM

Operation

No Connection:

If there is no connection found between the connectors of the cable being

tested, the LEDs on the units will not illuminate.

Mis-Wire:

If the wires in the cable are out of order, the LEDs on the Remote Tester will

illuminate to show what order they are wired in.

Open Circuit:

If the same LEDs on both the Main and Remote units remain off, the

corresponding wire is an open circuit.

Short Circuit:

If one or two wires are short circuited, the remote LEDs will not light up. If

three or more wires are short circuited, no LEDs light on either the Main or

Remote Tester.

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period

of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited

to repairing or replacing (at its sole option) any such defective products. To obtain service under

this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or

an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized

TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief

description of the problem encountered and proof of date and place of purchase. This warranty does

not apply to equipment, which has been damaged by accident, negligence or misapplication or has

been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss

of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

16-07-119-9335F3-EN.indd 3 8/5/2016 9:48:43 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	T016-004-K
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht verpakking:	680 g
Breedte verpakking:	124.5 mm
Diepte verpakking:	226.1 mm
Hoogte verpakking:	61 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Land van herkomst:	China
Duurzaamheidscertificaten:	RoHS
Opbergetui:	Ja
(Buitenste) hoofdverpakking hoogte:	325.1 mm
(Buitenste) hoofdverpakking breedte:	236.2 mm
(Buitenste) hoofdverpakking brutogewicht:	7170 g
(Buitenste) hoofdverpakking lengte:	269.2 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332197983
Testtype:	Short circuit testing, Transmission testing
Ondersteunde aansluitingen:	RJ-11, RJ-12, RJ-45