Tripp Lite SRXFANWM Handleiding

Tripp Lite Niet gecategoriseerd SRXFANWM

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRXFANWM (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 125 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Owner’s Manual

SmartRack®

Panel-Mount Roof Fan Kit

Model: SRFANWM

(Series number: AG-0285)

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Español 6 • Français 11

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation

of the product described in this manual. Read all instructions and warnings thoroughly before attempting

installation. Failure to comply may affect the warranty and cause property damage and personal injury.

Connection, Installation and Location Warnings

• This manual includes instructional safeguards for the skilled person installing the fans.

• Inspect the shipping container and the unit for shipping damage. Do not use the unit if it is damaged.

• The fans are designed to be installed in commercial locations, such as IT data racks where only adults are normally present.

• Install in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

• Do not attempt to modify or drill holes into the enclosure for mounting. Use the mounting holes provided.

• Install in accordance with National Electrical Codes (220-240V models).

• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian Electrical Code, Part I, C22.1 (120V models).

• To reduce the risk of ﬁre, connect only to a circuit provided with branch circuit overcurrent protection in accordance with the National

Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1 (120V models).

• Be sure to use maximum 16A overcurrent protection, in accordance with the plug/equipment rating, for the installation (220-240V

models).

• Be sure to use maximum 20A overcurrent protection, in accordance with the plug/equipment rating, for the installation (120V models).

• The equipment must be connected to an earthed ground mains socket-outlet.

• The plug on the power supply cord is intended to serve as the disconnect device. Be sure that the socket/outlet is installed near the

equipment and easily accessible.

• Appliance inlet models:

• Use only approved SJT or H05W-F power cord types in accordance with national regulations.

• Use power cords with a minimum 18 AWG (1.0mm2) wire gauge.

• Use only power cords with a protective earthing conductor and a socket outlet with an earthing connection.

• Securely fasten the fans in place with screws.

• When using tools, use eye protection and follow all other safety precautions recommended by the tool manufacturer and required by

applicable regulations.

• The fan does not require routine maintenance. Do not open the fan for any reason. There are no user-serviceable parts inside.

• Keep hair, clothing and loose objects away from the fan intakes. There is a risk of property damage and personal injury.

• Do not obstruct the fan openings. Do not block, cover or insert objects into the openings of the fan.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Explanation of Symbols

Caution, Risk of Danger

Caution, Moving Fan Blades

Recommended (Interior) Installation

1 Remove the metal screws from the vent shrouds.

3 Secure the wire between each fan to the

cabinet using the peel-and-stick cable

anchor with tie.

2 For internal installation, place fan units inside the enclosure and

position under the enclosure’s vents. To draw warm air out of

the enclosure, the airﬂow arrows should face up toward the top

of the enclosure. Use the metal screws removed in step 1 to

secure the fans to the enclosure.

To draw cool air into the enclosure, ﬂip the fan units so the Note:

airﬂow arrows point down.

4 Plug the input cable into a power source, such as an internal

PDU. For external power connection, utilize the removable cable

access panel.

Fans mounted inside the wall-mount enclosure draw air out of the cabinet to provide proper equipment cooling.

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	SRXFANWM
Kleur van het product:	Zwart
Type stekker:	C14
Snoerlengte:	0.91 m
Gewicht verpakking:	1770 g
Breedte verpakking:	198.1 mm
Diepte verpakking:	296.2 mm
Hoogte verpakking:	78.7 mm
Soort:	Koelventilator
Stroombron:	AC
Montage gereedschap:	Ja
Land van herkomst:	China
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	2 stuk(s)
Ingangsspanning:	230 V
Aantal ventilatoren:	1 ventilator(en)
(Buitenste) hoofdverpakking hoogte:	223.5 mm
(Buitenste) hoofdverpakking breedte:	525.8 mm
(Buitenste) hoofdverpakking brutogewicht:	22820 g
(Buitenste) hoofdverpakking lengte:	617.2 mm
Hoeveelheid per (buitenste) hoofdverpakking:	12 stuk(s)
AC-ingangsfrequentie:	50 Hz
Code geharmoniseerd systeem (HS):	8414.59.1500
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332243192
Ventilator diameter:	132.1 mm