Tripp Lite SRDVRLB Handleiding

Tripp Lite Videorecorder SRDVRLB

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRDVRLB (28 pagina's) in de categorie Videorecorder. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identiﬁcation 3

4. Enclosure Installation 4

4.1 Preparation 4

4.2 Unpacking 4

5. Enclosure Conﬁguration 5

5.1 Door Locks 5

5.2 Cable Access and Management 5

5.3 Mounting Rails 5

5.4 Adjusting Mounting Rail Depth 6

6. Mounting the Enclosure 6

6.1 Wall Mounting 6

6.2 Tabletop/Floor Mounting 7

7. Equipment Installation 8

7.1 Installing or Removing Cage Nuts 8

8. Storage and Service 9

9. Warranty and Product Registration 9

Español 10

Français 19

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

Security DVR Lockbox Enclosure

Model: SRDVRLB

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.

• Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all

equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• For permanent wall mounting, be sure to securely fasten the enclosure to the building structure before operation.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable

anesthetic mixture with air, oxygen or nitrous oxide.

Your Security DVR Lockbox Enclosure is an all-in-one solution for securely storing and cooling a digital video recorder (DVR) device. Using a compact

6U housing, this unit can be conveniently mounted to walls as well as be configured for tabletop or floor placement. To prevent theft and device

tampering, the SRDVRLB model comes equipped with a locking door that overlaps the enclosure’s top panel and sides. For optimal system

performance, a pre-installed cooling fan with air filter increases cool airflow inside and restricts incoming dust and airborne particulates.

3. Feature Identification

A Locking Front Door

B Removable Top Panel

C Vertical Mounting Rails

D Horizontal Rails

E Bottom Cable Access Holes

F Rear Cable Access Holes

Vent

H Cooling Fan with Air Filter

I Mounting Keyholes and Support Mounting Holes

J Bottom Mounting Holes

K Removable Cross Support Brace (Used for Wall Mounting the Enclosure)

Product specificaties

Merk:	Tripp Lite
Categorie:	Videorecorder
Model:	SRDVRLB
Kleur van het product:	Zwart
Gewicht:	13000 g
Breedte:	617.2 mm
Diepte:	467.4 mm
Hoogte:	254 mm
Gewicht verpakking:	15420 g
Breedte verpakking:	570 mm
Diepte verpakking:	714 mm
Hoogte verpakking:	344.9 mm
Land van herkomst:	China
(Buitenste) hoofdverpakking hoogte:	344.9 mm
(Buitenste) hoofdverpakking breedte:	570 mm
(Buitenste) hoofdverpakking brutogewicht:	15420 g
(Buitenste) hoofdverpakking lengte:	714 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Vergrendelbaar:	Ja
Ventilatiegaten:	Ja