Tripp Lite SmartRack SRWX12USNEMA Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SRWX12USNEMA

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SRWX12USNEMA (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identification 3

4. Enclosure Installation 4

4.1 Preparation 4

4.2 Unpacking 4

4.3 Placement 4

4.4 Ground Connection 4

4.5 AC Power Connection 5

5. Enclosure Configuration 5

5.1 Door Locks 5

5.2 Reversing the Enclosure Door 6

5.3 Reversing the Enclosure 6

5.4 Mounting Rails 7

5.5 Adjusting Mounting Rail Depth 7

5.6 Cleaning/Replacing Air Filters 7

6. Wall Mounting the Enclosure 7

6.1 Mounting 7

7. Equipment Installation 8

7.1 Installing or Removing Cage Nuts 8

7.2 Alternate Mounting: 9

Tapped Hole Mounting Rail

8. Specifications 10

9. Storage and Service 10

10. Warranty & Warranty Registration 10

Español 11

Francais 21

Русский 31

12U Wall-Mounted

SmartRack™ NEMA12

Enclosure

Model: SRW12USNEMA

Owner’s Manual

WARRANTY

REGISTRATION

chance to win a FREE Tripp Lite

product www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This Manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.

• Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all

equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The

combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any

damage that occurs during reshipment.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support